Hyflon® PFA P220 by Syensqo is a semi-crystalline, flame retardant perfluoroalkoxy (PFA) grade. Exhibits low flow, high heat resistance, chemical inertness, low surface energy and exceptional dielectric properties. Shows high viscosity, melt strength, lower permeability to gases and excellent mechanical characteristics. Retains properties over a wide range of temperature from cryogenic upto 260°C. Hyflon® PFA P220 is suitable for processing by extrusion-blow molding. Used in liners, piping, tubing, cable jacketing, semi-conductor molding compounds, chemical processing industries and aerospace applications. Complies with ASTM D 3307 Type II agency rating.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Hyflon® PFA P220 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CTE, Linear, Parallel to Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Crystallization Heat | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat of Fusion | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Peak Crystallization Temperature (DSC) (Crystalline Melt Temperature) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Heat Capacity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Thermal Conductivity | 0.0 Visible After Login | Visible After Login | Visible After Login |