TABOCAB TPG 001 by Silon is a polyolefin-based, halogen-free, flame retardant (HFFR) thermoplastic grade. It exhibits self-extinguishing properties with reduced toxic and corrosive gas emission. It is suitable for operating temperature 90°C and voltage rating up to 1 kV. It can be processed using extrusion. TABOCAB TPG 001 is recommended for use in sheathing & insulating power, control and signal cables in construction of NHXH E30-E90, N2XH E30-E90 and JE-H(St)H FE180/E30-E90. It complies with IEC 60092-359 SHF1, IEC 60502-1 ST8, EN 50363-8 TM7, VDE 0207/24 HM2, HM4, VDE 0250/215 HM5 and EN 50363-7 TI6, TI7. It can be stored for 9 months.
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
TABOCAB TPG 001 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Insulation Resistance Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Insulation Resistance Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Caloric Potential | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Electrical Conductivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Halogenidric acid emissions | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hot Air Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hot Pressure Test | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
TABOCAB TPG 001 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel-Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel-Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel-Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel-Zone 4 Temperature | Visible After Login | Visible After Login | |
| Collar Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Feed Zone Temperature | Visible After Login | Visible After Login | |
| Head Temperature | Visible After Login | Visible After Login | |
| Screw Compression ratio | Visible After Login | Visible After Login | |
| Screw L/D Ratio | Visible After Login | Visible After Login | |