THERMODAN® HF TP835 by SACO AEI Polymers is a low-smoke, low toxicity, halogen-free, flame retardant, thermoplastic black compound. It is suitable for processing by the extrusion method. It offers a high hot pressure performance and a high-stress crack resistance which allows it to be used as sheathing of any type of armored, large size cables. It is used in cable sheathing and insulation applications. It complies with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with THERMODAN® HF TP835 has passed the 3m3 smoke density chamber test to IEC 61034-2.
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
THERMODAN® HF TP835 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Insulation Constant (Ki) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Insulation Constant (Ki) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Halogen Acid Gas Evaluation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hot Pressure Deformation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Temperature Index | 0.0 Visible After Login | Visible After Login | Visible After Login |
THERMODAN® HF TP835 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression ratio | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Draw Down ratio | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Head Temperature | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Screw water temperature | Visible After Login | Visible After Login | |
| Zone 1 Temperature | Visible After Login | Visible After Login | |
| Zone 2 Temperature | Visible After Login | Visible After Login | |
| Zone 3 Temperature | Visible After Login | Visible After Login | |
| Zone 4 Temperature | Visible After Login | Visible After Login | |