THERMODAN® HF TP812 by SACO AEI Polymers is a low-smoke, low toxicity, halogen-free thermoplastic compound. It offers good processability, fast extrusion process with very low die drool. It possesses excellent tensile & flame retardant properties and meets the requirements of limited toxic & corrosive fume emission. It can be extruded using PVC extruders and screws. It is used in optical fiber cable, data and communication cables. THERMODAN® HF TP812 is also applicable in LV power cable insulation and small diameter cable sheathing where high flame retardancy is required. It meets the requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions.
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
THERMODAN® HF TP812 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Halogen Acid Gas Evaluation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Halogen Acid Gas Evaluation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
THERMODAN® HF TP812 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression ratio | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Draw Down ratio | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Head Temperature | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Screw water temperature | Visible After Login | Visible After Login | |
| Zone 1 Temperature | Visible After Login | Visible After Login | |
| Zone 2 Temperature | Visible After Login | Visible After Login | |
| Zone 3 Temperature | Visible After Login | Visible After Login | |
| Zone 4 Temperature | Visible After Login | Visible After Login | |