Armlen® PP TPE-10-75A by R&P POLYPLASTIC is a mineral filled, thermoplastic elastomer based on styrenic block copolymers containing modifying additives, heat and light stabilizers. This grade exhibits high resistance to rigid environments and polar solvents (ether, acetone, spirit). It displays atmosphere and ozone resistance. Armlen® PP TPE-10-75A can be exposed to frequent recycling and dying with super concentrates in the manufacturing of products. The processing melt and mold temperature are 220°C and 30°C respectively. It is approved for applications with edibles and potable water both hot and cold. This material is designed to replace technical rubbers.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Availability
Product Status:Visible After Login
Armlen® PP TPE-10-75A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |