Bio-Flex® F 1130 by FKuR is a biodegradable polymer-blend based on polylactic acid (PLA). It is derived from natural resource material but does not contain any starch or starch derivatives. It contains a copolyester and additives. It possesses high breathability and wide processing window. The PLA used for the production of Bio-Flex® is supplied by NatureWorks. It is processable on standard extrusion machinery with a high throughput. It can be easily colored with masterbatches based on PLA. It is printable without corona treatment. Bio-Flex® F 1130 is used for film extrusion.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Bio-Flex® F 1130 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 3.5% Flexural Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strain, At Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, Elmendorf, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, Elmendorf, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain At Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain At Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Volume Flow Rate (MVR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Bio-Flex® F 1130 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Blow Film Ratio | Visible After Login | Visible After Login | |
| Cylinder Zone 1 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 2 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 4 Temp. | Visible After Login | Visible After Login | |
| Die Diameter | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content (Suggested) | Visible After Login | Visible After Login | |
| Water jacket (feed) | Visible After Login | Visible After Login | |