ELIX PC/ABS 5120 by ELIX Polymers is an UV stabilized acrylonitrile butadiene styrene + polycarbonate [ABS + PC] grade. Exhibits excellent mechanical properties, high impact strength and flowability. Possesses low emission and low shrinkage. Provides good stability even with high humidity conditions, excellent processability and good paintability. Suitable for processing by injection molding. Used in radiator grille, pillars, instrument panel parts, seating parts, center console trim,
door components, small household, electrical switches, distribution boards and power sets. ELIX PC/ABS 5120 complies with REACH (Regulation (EC) No. 1907/2006 and Regulation (EU) No 453/2010).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
ELIX PC/ABS 5120 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flammability | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flammability(US-FMVSS) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Volume Flow Rate (MVR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption at Equilibrium | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption at Saturation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CTE, Linear, Parallel to Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| CTE, Linear, Transverse to Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Decomposition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat Deflection Temperature (HDT), Unannealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat Deflection Temperature (HDT), Unannealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
ELIX PC/ABS 5120 Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Drying Time (Dried Air System) | Visible After Login | Visible After Login | |
| Drying Time (Fresh Air Dryer- high speed) | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Section Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time (Circulation Dryer) | Visible After Login | Visible After Login | |
| Feeding Section Temperature | Visible After Login | Visible After Login | |
| Injection Velocity | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Metering Section Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Mold shrinkage, Crosswise | Visible After Login | Visible After Login | |
| Mold shrinkage, Lengthwise | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |