ELVAX™ 260A by Dow is an ethylene vinyl acetate (EVA) copolymer grade, filled with 28%wt vinyl acetate comonomer content. Contains butylated hydroxytoluene (BHT) antioxidant as a thermal stabilizer. Exhibits flex crack resistance, excellent clarity, cling, impact- and puncture resistance. Can be processed by injection molding, structural foam molding, blow molding and wire coating. ELVAX™ 260A by Dow is recommended for industrial applications. Can be used as strippable semi-conductor insulation shields. Suitable for extremely tough, heat resistant jackets for automotive ignition and low-smoke cables. Complies with Food and Drug Administration Regulation 21 CFR 177.1350(a)(1).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
ELVAX™ 260A properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Freezing Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
ELVAX™ 260A Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Booster Cycle | Visible After Login | Visible After Login | |
| Cure Cycle (per 6.35 mm of thickness) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Front) | Visible After Login | Visible After Login | |
| Cylinder Temperature (Nozzle) | Visible After Login | Visible After Login | |
| Cylinder temperature (Center) | Visible After Login | Visible After Login | |
| Cylinder temperature (Rear) | Visible After Login | Visible After Login | |
| Depth | Visible After Login | Visible After Login | |
| Fill Rate | Visible After Login | Visible After Login | |
| Flight | Visible After Login | Visible After Login | |
| Injection Cycle | Visible After Login | Visible After Login | |
| Injection Pressure (without flash) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Processing Temperature | Visible After Login | Visible After Login | |
| Screw diameter | Visible After Login | Visible After Login | |