NEOFLON™ FEP NP-30 by Daikin is a perfluoroethylene propylene (FEP) copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP). Exhibits high performance, lower melt viscosity, high transparency, resistance to weather-, chemicals-, moisture-, light-, flame- and permeation. Shows non-sticking properties, electrical reliability, low reactivity, lowest critical surface energy, chemical- and thermal stability. Possesses low dielectric constant, dissipation factor with high dielectric strength over a wide range of frequencies and temperatures. Suitable for film extrusion applications. Recommended for heavy wall wire insulation, tubes and cable jacketing. NEOFLON™ FEP NP-30 complies with FDA 21 CFR.177.1550, ISO 9001 (Quality System), ISO 14001 (Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
NEOFLON™ FEP NP-30 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Combustibility | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dissipation Factor | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dissipation Factor | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compressive Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| MIT Flex | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
NEOFLON™ FEP NP-30 Processing Guidelines
Extrusion/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Mold Temperature | Visible After Login | Visible After Login | |