NEOFLON™ FEP NP-108 is a perfluoroethylene propylene (FEP) grade by Daikin. Exhibits thermal stability, chemical inertness, non-sticking properties, electrical reliability, long-term weather resistance, high transparency and flame resistance. NEOFLON™ FEP NP-108 is designed for high-speed extrusion of thin coatings of small wire sizes such as plenum cable insulation and injection molding of thin wall parts. Used in wire & cable coatings, films, sheets, tubes, small parts, pipe & valve linings and sleeves. Meets ISO 9001:2008.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
NEOFLON™ FEP NP-108 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| MIT Flex | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
NEOFLON™ FEP NP-108 Processing Guidelines
Extrusion/Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |