DAI-EL™ G-684BP by Daikin is a general purpose bisphenol curable fluoroelastomer (FKM) gum terpolymer containing 70% fluorine content. It exhibits excellent processability, fast curing, mold flowability and improved low temperature flexibility. DAI-EL™ G-684BP is recommended for compression, transfer and injection molding processes. It offers exceptional fluid resistance. It is applicable for O-rings, seals, gaskets and molded tubings. It is soluble in lower ketones and esters.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
DAI-EL™ G-684BP properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Torque (MH) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Minimum Torque (ML) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cure time (t90) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Scorch time (ts2) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Mooney | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Retraction Temperature (TR10) | 0.0 Visible After Login | Visible After Login | Visible After Login |