DAI-EL™ G-663BP by Daikin is a bisphenol curable fluoroelastomer (FKM) gum terpolymer. It contains 67% fluorine content. It is recommended for compression, transfer and injection molding processes. DAI-EL™ G-663BP offers excellent processability, fast curing, mold flowability, improved low temperature flexibility and better fluid resistance than copolymers. It is applicable for O-rings, seals, gaskets and molded tubings. It is soluble in lower ketones and esters.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
DAI-EL™ G-663BP properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Torque (MH) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Minimum Torque (ML) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cure Time (t90) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Scorch Time (ts2) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Mooney | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Retraction Temperature (TR10) | 0.0 Visible After Login | Visible After Login | Visible After Login |