Technical datasheet
Ultrafuse® Z PCTG
Supplied byBASF 3D Printing Solutions- Last Updated on Feb 15, 2021
Ultrafuse® Z PCTG by BASF 3D Printing Solutions is the first ESD safe PCT filament for fused filament fabrication (FFF) printing. It is powered by Essentium*, developed specifically for the printing of handheld tools, various assembly & electronic fixtures, robotics, automation components, and parts for explosion proof environments. Exhibits increased impact strength and very smooth surface properties which helps to prevent latent failures in electronics. Ultrafuse® Z PCTG is an easy-to-print, machine & finish, non-marring, low cost grade, strong enough for lightly loaded fixtures.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Ultrafuse® Z PCTG properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Unnotched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Ultrafuse® Z PCTG Processing Guidelines
3D Printing Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Bed Temperature | Visible After Login | Visible After Login | |
| Nozzle Diameter | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Print Speed | Visible After Login | Visible After Login | |