Plastics and elastomers for Compression Molding

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

Viton™ A-331C by Chemours is an intermediate viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals. It offers good mold flow, excellent storage stability, improved demolding hot tear resistance, good mold release with less mold fouling and good compression set resistance. It is fully precompounded with reduced curative level and incorporated process aid. It is suitable for processing by transfer molding, injection molding, compression molding and extrusion. Viton™ A-331C is suitable for O-rings, seals, gaskets, profile and extruded O-ring cord & hose applications.

ULTEM™ resin HU1010 by SABIC is an unreinforced, amorphous, high stiffness polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. It offers steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It features excellent mechanical, electrical and dimensional properties up to high temperatures. It provides very good chemical resistance for an amorphous material. It provides hydrolytic stability, low smoke and toxicity. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It is transparent amber colored but is also available in custom colors - transparent and opaque. It is suitable for additive manufacturing, injection compression molding, compression molding, foam extrusion, extrusion blow molding, film extrusion, injection molding, profile extrusion, extrusion and extrusion compounding. ULTEM™ resin HU1010 is designed for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory, sleep therapy, personal recreation, healthcare, patient testing, fluid and blood handling, medical facility and infrastructure. It is an inherent flame retardant offering UL94 V0 and 5V ratings. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. The grade is RoHS- and food compliant (FDA, CN, EC).

ULTEM™ resin 1010 by SABIC is a general purpose, amorphous, metallizable, flame-retardant polyetherimide (PEI) grade. It offers high flow, durability, excellent mechanical properties and dimensional stability. It provides easy processability, low toxicity and smoke evolution. Exhibits hydrolytic stability, low creep sensitivity, low shrinkage, high electric breakdown strength (BDS), UV-C and radiation resistance (gamma, x-ray). It provides high heat resistance, chemical resistance and stability of physical & mechanical properties at elevated temperatures with high strength, modulus and stiffness up to 200°C. It retains strength and resists stress cracking when exposed to automotive, aircraft and hydrolytic fluids, aliphatic hydrocarbons, alcohols, acids and weak aqueous solutions. Shows good metal adhesion and is transparent to microwave radiation & near IR. ULTEM™ resin 1010 is suitable for processing by injection molding, additive manufacturing, extrusion blow molding, film-, foam & profile extrusion, compression molding, extrusion compounding, hot rolling and injection compression molding. Recommended for rigid packaging, aircraft interiors, defense, outdoor lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays and specialty vehicles. It is also used in ophthalmics, rail, wind energy, sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, and electronic material handling. Suitable for electrical components & infrastructure, personal recreation, industrial material handling, composite, automotive under the hood, commercial appliance and recreational vehicle. It complies with RoHS, aerospace FAR 25.853, UL 94 V-0 and 94 5VA flame rating.
ISCC+ certified bio-based version also available for this grade.

ULTEM™ resin 1000F by SABIC is an unreinforced, flame retardant, amorphous polyetherimide (PEI) resin. It exhibits internal mold release, good chemical-, radiation (gamma, x-ray), UV-C-, and high heat resistance. It offers high stiffness, hydrolytic stability, low smoke, low food stain, low extractable, toxicity and good mechanicals in broad temperature range. Provides low creep sensitivity, low shrinkage, good metal adhesion, high strength, good dimensional stability, good processability and electrical properties. It is suitable for processing by additive manufacturing, injection compression molding, extrusion blow molding, foam-, film & profile extrusion, compounding. It is transparent to Microwave radiation & near IR and cold to the touch solutions. ULTEM™ resin 1000F is suitable for flexible food & consumer packaging, home decoration, personal accessory, home and commercial appliances, and personal recreation. It is UL 94 V-0, V-2 and 5VA flame rated, RoHS and global food compliant.

ULTEM™ resin PW1000 by SABIC is an unreinforced, transparent, flame retarded, amorphous, standard flow polyetherimide (PEI) resin. Exhibits good dimensional stability and excellent mechanical properties at high temperatures and under wet conditions. Offers low smoke and toxicity, good processability and high glass transition temperature (Tg) up to 217°C. It is suitable for processing by additive manufacturing, injection compression molding, compounding, foam-, blow molding-, film- and profile extrusion. Possesses high stiffness, hydrolytic stability and high strength. Shows low creep sensitivity and low shrinkage. Provides chemical resistance and high heat resistance. Designed for buildings & construction. It is certified with KTW-BWGL, WRAS, ACS, NSF-61 and W270 for potable water applications. ULTEM™ resin PW1000 is food contact acceptable and complies with RoHS, FDA, European Food Contact, CN and EC.

ULTEM™ resin HU1000E by SABIC is an unreinforced, PFAS-free, amorphous, transparent, high stiffness, standard flow polyetherimide (PEI) resin with high glass transition temperature (Tg) of 217°C. It offers hydrolytic stability, low smoke and toxicity. It provides low creep sensitivity, low shrinkage, high strength, high heat resistance and good processability.

• It imparts steam-, hydrogen peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles.
• It may offer global food compliance (FDA, CN, EC).
• It features excellent mechanical, electrical and dimensional stability properties up to high temperatures.
• It imparts very good chemical resistance for an amorphous material.
• It is inherently flame retardant offering UL94 V0 and 5V ratings.
• It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies.
• It is transparent amber colored but is also available in custom colors-transparent and opaque.
• It is processed by additive manufacturing, injection compression molding, compression molding, foam extrusion, extrusion blow molding, film extrusion, injection molding, profile extrusion, extrusion and extrusion compounding.
• Recommended for pharmaceutical packaging, drug delivery, surgical devices, general healthcare and patient testing.
• ULTEM™ resin HU1000E is RoHS compliant.

ULTEM™ resin 1010TC by SABIC is an inherently flame retardant, general purpose, amorphous, high heat resistant, unreinforced polyetherimide (PEI) resin. It offers improved flow, very good chemical resistance and excellent mechanical, electrical & dimensional properties up to high temperatures. Exhibits controlled light transmission levels (different colors for different transmission %). Provides high stiffness, hydrolytic stability, attenuation control, infrared transparence, low smoke & toxicity, low creep sensitivity, low shrinkage, good metal adhesion, high strength. It is suitable for processing by injection, compression molding and film extrusion. ULTEM™ resin 1010TC is recommended for electrical devices & displays, electronic material handling, electrical components & infrastructure and industrial applications. Complies with RoHS and UL 94 V-0 & 5VA flame ratings.

ULTEM™ resin 1000R by SABIC is an unreinforced amorphous, flame retardant, metallizable polyetherimide (PEI) resin. It exhibits internal mold release, good dimensional stability, high electric breakdown strength (BDS), good chemical-, radiation (gamma, x-ray), UV-C-, and high heat resistance. It offers high stiffness, hydrolytic stability, good metal adhesion, high strength, low smoke & toxicity and good mechanicals in broad temperature range. Provides low creep sensitivity, low shrinkage, good dimensional stability, good processability and excellent electrical properties. It is suitable for processing by additive manufacturing, extrusion blow molding, film-, foam & profile extrusion, compounding and injection molding. ULTEM™ resin 1000F is recommended for rigid packaging, aircraft interiors, defence, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail and wind energy. Used in sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage, home & commercial appliances, servomotor, bus, electronic & industrial material handling, electrical components & infrastructure, personal recreation, composite, automotive under the hood, and recreational vehicle. It is UL 94 V-0, V-2 and 5VA flame-rated and RoHS compliant.
ISCC+ certified bio-based version also available for this grade.

ULTEM™ resin 1010R by SABIC is an unreinforced, amorphous, metallizable, general-purpose, flame-retardant polyetherimide (PEI) with improved flow. It shows radiation- (gamma, x-ray), UV-C, chemical- and high heat resistance. It offers high electric breakdown strength (BDS), high stiffness, hydrolytic stability, low smoke and toxicity. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and good mold release. It features excellent mechanical, electrical and dimensional stability properties up to high temperatures. It is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam extrusion, extrusion blow molding, film extrusion, injection molding, profile extrusion and extrusion compounding. Recommended for rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage and home appliances. ULTEM™ resin 1010R is also designed for servomotor, bus, electronic material handling, electrical components & infrastructure, personal recreation, industrial material handling, composite, automotive under the hood, electronic material, commercial appliance, mass transportation, hydrocarbon & energy, electronics and recreational vehicle. It is UL94 V-0 & 5V rated, aerospace FAR 25.853 and RoHS compliant.
ISCC+ certified bio-based version also available for this grade.