Return to supplier page
Crayvallac® A-2678-M distributed by DKSH is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. It eliminates film surface defects that may occur during the film formation.<br>
<ul style="padding-left: 40px;"><li>It offers enhanced substrate wetting, reduces craters and fisheyes, minimizes orange peel and pinholes, and improves gloss and DOI, all without detracting from exterior durability.</li>
<li>It is recoatable, pourable and pre-neutralized. </li>
<li>It can be added to coating formulations at any step in the manufacturing of paints.</li>
<li>It is mostly suitable for use in a wide range of water-based coating systems as acrylic emulsions, water reducible alkyds and pigment concentrates. </li>
<li>Recommended dosage level is 0.5-2.0% additive solids on total vehicle solids for in spray applications, flow/levelling and gloss enhancement.</li>
<li>Crayvallac® A-2678-M has a shelf life of 2 years.</li><li>It is available in Canada.</li></ul> Crayvallac® A-72-A260-A distributed by DKSH is a polyacrylate surface tension modifier and flow control agent. It is silicone-free, which helps reduce fisheyes, craters, pinholes, and orange peel. It also improves gloss and DOI, and is recoatable.<br>
<ul style="padding-left: 40px;"><li>It is used in roller applied-, coil-, and metal deco- coatings.</li>
<li>It is a higher molecular weight version of Crayvallac® A-620-A2-A.</li>
<li>Recommended dosage level is 0.5-2.0%.</li>
<li>Crayvallac® A-72-A260-A is available in Canada.</li></ul> Crayvallac® 60P distributed by DKSH is an oxidized polyethylene wax. It provides pigment suspension without any increase in the apparent viscosity. It exhibits good anti-settle properties at spraying viscosities, sag resistance, good recoatability and is tolerant to high processing temperatures.<br>
<ul style="padding-left: 40px;"><li>It can be easily incorporated and activated in coating systems using most high shear dispersion equipment.</li>
<li>Crayvallac® 60P is used in most solvent-based formulations including industrial & maintenance coatings, epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.</li>
<li>Recommended dosage level is 0.5-3.0% for anti-settle and sag resistance.</li>
<li>It has a shelf life of 4 years.</li>
<li>It is available in Canada.</li></ul> Crayvallac® Antisettle CVP distributed by DKSH is a micronized hydrogenated castor oil rheology modifier for aliphatic solvent-based coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. It offers very good sag resistance anti-settle properties with good recoatability.<br>
<ul style="padding-left: 40px;"><li>Recommended dosage level is 0.2-1.5% for anti-settle and sag resistance.</li>
<li>It has a shelf life of 4 years.</li><li>Crayvallac® Antisettle CVP is available in Canada.</li></ul> Crayvallac® A-2201-M-A distributed by DKSH is a polyacrylate surface tension and air release modifier. It is silicone-free and helps reduce fisheyes, craters, pinholes, and orange peel, while improving gloss and DOI. It is also recoatable.<br>
<ul style="padding-left: 40px;"><li>Crayvallac® A-2201-M-A is used in roller applied-, coil-, and metal deco- coatings.</li>
<li>It is available in Canada.</li></ul> Crayvallac® PC distributed by DKSH is a flow-, leveling- and degassing agent. It is a micronized hydrogenated castor oil derivative surface enhancing additive.
It is easily incorporated using conventional pre-mixing techniques prior to extrusion.<br>
<ul style="padding-left: 40px;"><li>It shows good compatibility with polyesters and hybrids.</li>
<li> The use of product leads to a substantial improvement.</li>
<li> This improvement is attributed to Crayvallac® PC, which enhances flow, leveling, and degassing processes during curing.</li>
<li> It reduces the melt viscosity during this critical levelling stage in the cure cycle.</li>
<li> This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin.</li>
<li> It works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.</li>
<li>Recommended dosage level is 0.5-2%.</li>
<li> It has a shelf life of 4 years.</li>
<li> It is available in Canada.</li></ul> Crayvallac® SL distributed by DKSH is a high performance micronized amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90-115°C.<br>
<ul style="padding-left: 40px;"><li>It is converted to an interacting network of crystalline fibres.</li>
<li>It is this network that gives rise to the shear thinning rheology.</li>
<li>This shear-thinning characteristic results in low viscosity at the shear rates associated with extrusion application and very high viscosity under the low shear rates experienced after application.</li>
<li>It offers excellent extrusion properties, sag and slump resistance, minimal effect on modulus, and exceptional storage stability.</li>
<li>Crayvallac® SL is used in paints and coatings.</li>
<li>Recommended dosage level is 1-5% by mass on total formulation. </li>
<li>It has a shelf life of 4 years.</li>
<li> It is available in Canada.</li></ul> Crayvallac® PA3 BA 20 distributed by DKSH is a HAPs free, high efficieny, pre-activated amide wax-based rheology modifier. It is dispersed in mixture of butyl acetate and alcohols. It offers excellent sag resistance, anti-settle properties, and good recoatability.<br>
<ul style="padding-left: 40px;"><li>It is supplied in the form of crystalline fibres.</li>
<li>In a coating system, these fibres form an interacting network.</li>
<li>It imparts shear-thinning rheology with thixotropic viscosity recovery, making it easy to incorporate and suitable for post-addition.</li>
<li>It has excellent control of sedimentation combined with ease of application.</li>
<li>Crayvallac® PA3 BA 20 is suitable for post-addition to solvent-based industrial coatings.</li>
<li>Recommended dosage level is 0.5-2.0% for anti-settling and 2.0-5.0% for sag resistance.</li>
<li>It has a shelf life of 2 years.</li>
<li>It is available in Canada.</li></ul>
114 products 48 products 42 products 40 products
Crayvallac®
Coating ingredients supplied by DKSH
8 Products match your search
Crayvallac® A-2678-M
by DKSH
- Support available
- Original documents
Crayvallac® A-72-A260-A
by DKSH
- Support available
- Original documents
Crayvallac® 60P
by DKSH
- Support available
- Original documents
Crayvallac® Antisettle CVP
by DKSH
- Support available
- Original documents
Crayvallac® A-2201-M-A
by DKSH
- Support available
- Original documents
Crayvallac® PC
by DKSH
- Support available
- Original documents
Crayvallac® SL
by DKSH
- Support available
- Original documents
Crayvallac® PA3 BA 20
by DKSH
- Support available
- Original documents
Showper page
TEGO®
by DKSH
ITAMINE
by DKSH
VYLON®
by DKSH