Return to supplier page
Dispelair® CF 697 by Blackburn Chemicals is a foam control agent and excellent defoamer for solvent-based and solvent-free coatings. It is used in a wide range of aqueous & non-aqueous systems and decorative emulsion paints. It is used very successfully to eliminate foam in the production of inks and pigment dispersions. This additive is also suitable for matt, silk and gloss paints, wood coatings and varnishes. It is effective at very low concentrations. It is SVHC Label- & mineral oil- free, helps with process productivity and also shows high dispersibility in water. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. Dispelair® CF 697 complies with the indirect food contact regulations listed in 21CFR: 176.210 & 175.105. Also, complies with the Swiss Ordinance Annex 10 and plastics directive EU 10/2011. The shelf life of this product is 12 months. Dispelair® CF 44 by Blackburn Chemicals is a foam control agent and excellent defoamer. It is effective in air release and at very low concentrations. It helps with process productivity. This additive shows low dispersibility in water. It is used very successfully to eliminate foam in the production and application of solvent-free, self-leveling polyurethane floor coatings. A typical addition level would be between 0.1% and 1% in total depending on the severity of the foam problem. The shelf life of Dispelair® CF 44 is 12 months. Dispelair® CF 993 by Blackburn Chemicals is an effective foam control agent and excellent defoamer for solvent-based and solvent-free coatings. It is effective at very low concentrations. It helps with process productivity. It is used very successfully to eliminate foam in the production and application of solvent-free 2K floor coatings and pigmented self-leveling formulations. It displays especially good air release in higher viscosity formulations. Dispelair® CF 993 is compatible with epoxy and polyurethane resin chemistries. This additive shows low dispersibility in water. A typical addition level would be between 0.1% and 1% in total depending on the severity of the foam problem. The shelf life of this product is 12 months. Dispelair® CF 929 by Blackburn Chemicals is an effective foam control agent and excellent defoamer for water-based coatings. It shows high dispersibility in water, very broad-ranging and excellent compatibility. It is effective at low concentrations and also helps with process productivity. It is used very successfully in matt, silk and gloss paints, varnishes, inks and spray coatings. Dispelair® CF 929 is suitable for both clear and pigmented systems. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. It complies with the indirect food contact regulations listed in 21CFR: 175.105. The shelf life of this product is 12 months. Dispelair® CF 604 by Blackburn Chemicals is an effective foam control agent in a wide range of aqueous systems. It is used very successfully to eliminate micro-air upon the spray application of both interior and exterior coatings. It can be used with airless and air-assisted spray technologies. Dispelair® CF 604 is suitable for both clear and pigmented systems. It shows high dispersibility in water and excellent compatibility. It is effective at low concentrations and also helps with process productivity. A typical addition level would be between 0.1% and 1% in total depending on the severity of the foam problem. It complies with the indirect food contact regulations listed in 21 CFR: 175.105 & 176.210. Also, complies with the Swiss Ordinance Annex 10. The shelf life of this product is 12 months. Dispelair® CF 617 by Blackburn Chemicals is an effective foam control agent and excellent defoamer for solvent-based and solvent-free coatings. It is specifically designed for a wide range of aqueous and non-aqueous systems. It is used very successfully to eliminate foam in the production of inks and pigment dispersions. Also, suitable for matt, silk and gloss paints, wood coatings and varnishes. It is effective at very low concentrations and shows low dispersibility in water. Dispelair® CF 617 helps with process productivity. Its typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. It complies with the indirect food contact regulations listed in 21CFR: 175.105 & 176.210. Also, complies with the Swiss Ordinance Annex 6 and EU regulation 10/2011. The shelf life of this product is 12 months. Dispelair® CF 902 by Blackburn Chemicals is an effective bio-based (vegetable oil) foam control agent designed for water-based coating, paints and inks. It is an excellent VOC-free defoamer and helps with process productivity. It is made from 86% renewable sources. It is used very successfully in low to high PVC systems. It shows effectiveness over a wide range of pH values, temperatures and at low concentrations. It is mineral oil- and SVHC Label-free with medium dispersibility in water. It is also used in low gloss decorative emulsion paints, paper coatings and plasters. Recommended dosage level would be between 0.1-0.5% in total depending on the severity of the foam problem. Dispelair® CF 902 has a shelf life of 12 months. Dispelair® CF 898 by Blackburn Chemicals is an effective, foam control agent and excellent defoamer for water-based paints. It shows medium dispersibility in water and lower unit cost compared to a traditional mineral oil-based defoamer. It is effective over a wide range of temperatures & pH values and at low concentrations. It helps with process productivity. Dispelair® CF 898 is used very successfully in medium to high PVC emulsion and decorative emulsion paint systems. Also, used in plasters and some low gloss paints. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. It is SVHC Label-free and complies with the indirect food contact regulations listed in 21CFR: 176.210 & 175.105. The shelf life of this product is 12 months. Dispelair® CF 49 by Blackburn Chemicals is an effective foam control agent and excellent defoamer. It is used very successfully in water-based paints and inks. It shows very good compatibility and very good dispersibility in systems with low surfactant content. This additive is effective over a wide range of pH values & temperatures and at low concentrations. It displays high dispersibility in water and also helps with process productivity. A typical addition level would be between 0.1% and 0.5% in total depending on the severity of the foam problem. Dispelair® CF 49 complies with the indirect food contact regulations listed in 21CFR: 176.210 & 175.105. The shelf life of this product is 12 months. Dispelair® CF 345 by Blackburn Chemicals is a solvent and silicone free, foam control agent and excellent defoamer for coatings. It shows good compatibility and medium dispersibility in water. It is effective over a wide range of pH values & temperatures and at low concentrations. It is mineral oil- & SVHC label-free and helps with process productivity. It is suitable for many aqueous systems. Dispelair® CF 345 is used very successfully to eliminate foam in the production and application of gloss paints, wood coatings, decorative emulsion paints and pigment dispersions. Also, used in matt and silk paints. A typical addition level would be between 0.05% and 0.5% in total, depending on the severity of the foam problem. The shelf life of this product is 12 months.
Dispelair®
Coating ingredients supplied by Blackburn Chemicals