Return to supplier page
SETYRENE® 13-2434 by allnex is vinyl toluene modified alkyd copolymer. Provides light color and good color retention to the formulated coatings. Exhibits very good tolerance for aliphatic solvents. Designed for fast dry industrial coatings, floor sealers, dry fall maintenance coatings and aerosol paints. It is suitable to be blended with medium oil alkyds at a rate not to exceed 20% of the vehicle solids to accelerate drying rates. Shelf life of SETYRENE® 13-2434 is 1 year at 100°F. SETYRENE™ 13-2424 by allnex is an alkyd resin that has been copolymerized with vinyl toluene to produce a very rapid drying product. It offers limited compatibility with medium oil alkyds but may be blended up to 20% of the vehicle solids to significantly accelerate drying rates. It provides good tolerance for aliphatic solvents. SETYRENE™ 13-2424 is used in fast dry industrial coatings, floor sealers, dry fall maintenance coatings, stain blocking primers and aerosol paints. It has a shelf life of one year. SETYRENE™ 78 XS-55 by allnex is a resin solution, tall oil fatty acid alkyd copolymerized with an acrylic monomer. It is used to produce a vehicle for fast air-dry finishes having good durability and application properties. Recommended for car repair topcoats when used in combination with thermoplastic resins. The shelf life of SETYRENE™ 78 XS-55 is 1 year. SETYRENE™ 74 XX-60 by allnex is styrene and acrylic modified alkyd resin based upon blends of semi-drying vegetable fatty acids. It possesses very good pigment wetting properties, high gloss & build, good mar-resistance and exterior durability. Recommended for usual spray and dipping application in air-drying, forced drying, stoving primers and specialty finishes. SETYRENE™ 74 XX-60 is used in hammer-finishes, drum paints, enamels for agricultural implements & big rolling stock. The shelf life for this product is 24 months. SETYRENE™ 13-4437 by allnex is a specially formulated silicone modified copolymer alkyd that meets the vehicle requirements of federal specification TT-E-490E. It displays outstanding durability of exterior gloss and semi-gloss enamels. It is extremely tough, long-lasting and abrasion resistant. This product is highly resistant to cracking caused by severe temperature changes. It imparts better heat resistance to paints that will be used on surfaces as hot as 800°F. It is recommended for power transmission towers- and storage tanks & water towers coatings. It is also used in finishes for stadium seats. The shelf life of SETYRENE™ 13-4437 is 1 year. SETYRENE™ 23-3319 by allnex is the low HAPs containing high solids version of SETYRENE™ 23-3317 styrene acrylic modified copolymer alkyd. This resin possesses the very desirable properties of good set/dry speed with high gloss and good general film performance. It offers good pigment wetting properties. Improved flexibility may be attained via modification with PARAPLEX® G-31 at the level of 5 to 7% on resin non-volatile. SETYRENE™ 23-3319 will allow formulation of 3.5 lb/gal/420 g/l VOC coatings. It is designed for VOC compliant primers for general industrial enamels, implement coatings and compliant coatings for automotive under-hood parts. The shelf life of this product is one year. SETYRENE™ 13-3513 by allnex is a resin solution, oxidizing oil copolymer alkyd modified with an acrylic monomer. It is used to produce a vehicle for very fast air dry or low temperature force dry. SETYRENE™ 13-3513 provides good adhesion and good durability. Recommended for aerosol marking enamels, conventional general industrial spray enamels for metal and toy, tool or touch-up enamels. SETYRENE™ 13-3504 by allnex is a resin solution, oxidizing oil modified alkyd copolymerized with an acrylic monomer. It is used to produce a vehicle for fast air dry or bake finishes having good durability and resistance properties. SETYRENE™ 13-3504 provides good adhesion, flexibility, gloss, color & color retention. Recommended for metal furniture. The shelf life for this product is 1 year. SETYRENE™ 13-3518 by allnex is an oxidizing oil modified alkyd copolymerized with an acrylic monomer. It shows good durability, adhesion, flexibility, gloss and color. It is compatible with VM&P, mineral spirits and other aliphatic solvents. SETYRENE™ 13-3518 is suitable for fast air-dried or baked finishes for farm implements, machinery, metal furniture, aerosol packaged finishes and yard goods & tools. The shelf life of the grade is 1 year. SETYRENE™ 13-1807 by allnex is a resin solution, copolymer of styrene and a soya/dehydrated castor oil alkyd. It is designed for fast air-dry with good adhesion, flexibility and durability properties. Recommended for fast dry glossy and semi-gloss enamels. SETYRENE™ 13-1807 is used in toys, metal furniture and hardware & metal or hardboard parts. The shelf life of this product is 1 year.
SETYRENE™
Coating ingredients supplied by allnex
14 Products match your search
SETYRENE® 13-2434
by allnex
- Support available
- Original documents
SETYRENE™ 13-2424
by allnex
- Support available
- Original documents
SETYRENE™ 78 XS-55
by allnex
- Support available
- Original documents
SETYRENE™ 74 XX-60
by allnex
- Support available
- Original documents
SETYRENE™ 13-4437
by allnex
- Support available
- Original documents
SETYRENE™ 23-3319
by allnex
- Support available
- Original documents
SETYRENE™ 13-3513
by allnex
- Support available
- Original documents
SETYRENE™ 13-3504
by allnex
- Support available
- Original documents
SETYRENE™ 13-3518
by allnex
- Support available
- Original documents
SETYRENE™ 13-1807
by allnex
- Support available
- Original documents

