ESACOTE® PU 850 by Lamberti is an anionic waterborne dispersion of
an aliphatic polyurethane based on polyether diols. It can be used as binder for primer on bioriented polypropylene or bioriented polyester before metallization with aluminum (or aluminum oxide), functionalizing over print varnishes, heat sealable resins.
- It is a solvent-free product that is neutralized with triethylamine and gives a medium hard, highly flexible, transparent and glossy film.
- It shows good adhesion, good overcoatability, overprintability and capability to receive surface treatments.
- It can be used as unique resin or in combination with other water based resins.
- It can be crosslinked with water dispersible polyisocyanates, melamine resins, polyaziridines or carbodiimides.
- It is suitable for flexo and rotogravure lamination inks.
- ESACOTE® PU 850 has a shelf life of 12 months and is available in Taiwan, Japan & Europe.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
ESACOTE® PU 850 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Minimal Film Forming Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Solid Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |