Coating ingredients for Plastic Coatings
4501 products found
EBECRYL® 436
by allnex
EBECRYL® 436 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA). It exhibits good lithographic behavior, pigment wetting properties and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 436 display good adhesion to metals, plastics and paper. It is recommended for wet lithographic inks for paper, plastics and metals, overprint varnishes and post-formable inks.
- Support available
- Original documents
DEGALAN® 64/12 N
by DKSH
DEGALAN® 64/12 N distributed by DKSH is a granulated polymer based on methacrylates. It is versatile binder for concrete- and thick-layer metal coatings. It exhibits weather- and chemical resistance and lightfastness.
- It is used in marine & container coatings, primers, impregnations, exterior house- and road marking paints and plastic coatings.
- It is compatible with most PVC copolymers, nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/acetopropionate and partly compatible with alkyd and epoxy ester resins.
- DEGALAN® 64/12 N has a shelf life of 5 years and is available in Indonesia, Philippines, Vietnam, Belgium, Netherlands and Luxembourg.
- Support available
- Original documents
SYLOID® 7000
by DKSH
SYLOID® 7000 distributed by DKSH is a wax treated, synthetic amorphous silica with special organic treatment. It acts as a matting agent. It exhibits high porosity, high matting effect, ease of dispersion, excellent film clarity and film smoothness.
- It offers excellent optical properties in wet paint and dried coating film.
- It is suitable for use in high quality water-borne and solvent-borne coatings for furniture, artificial and natural leather, automotive plastic parts, foils, laminates, and UV-curable acrylate systems.
- SYLOID® 7000 has a shelf life of 12 months.
- It is available in Asia and Europe.
- Support available
- Original documents
Techpolymer™ EFC-208B
by Sekisui Kasei
Techpolymer™ EFC-208B by Sekisui Kasei can be used as a matting agent. Offers soft and smooth texture on coating surface. It is a crosslinked acrylic copolymer grade. It contains 50% biomass content and contributes in lowering the environmental loads. Its mean particle diameter is between 6.0-10.0 µm. Techpolymer™ EFC-208B is composed of polymer particles and can maintain the major properties as other Techpolymer™ lineup.
- Original documents
Lacper® 4507
by Wanhua Chemical
Lacper® 4507 by Wanhua Chemical is a self-crosslinking acrylic copolymer emulsion. It shows high transparancy, excellent in-can and dry-film clarity because of its small particle size.
- It exhibits good film hardness, fast drying speed, good sandability and excellent chemical resistance.
- It has good adhesion to a variety of substrates such as wood, plastics such as ABS, PC and PVC.
- Lacper® 4507 contains no APEO, formaldehyde and its derivative.
- This waterborne resin is recommended for interior, exterior, primer sealer, midcoat, basecoat, clearcoat, topcoat, wood and plastic applications.
- Support available
- Original documents
EPOCROS™ WS-700
by Nippon Shokubai
EPOCROS™ WS-700 by Nippon Shokubai is a VOC-free adhesion promoter and a waterborne crosslinker based on acrylic, high oxazoline functionalized reactive copolymer. The new crosslinking technology enhances the reactivity between oxazoline groups and carboxy groups through a heating and mixing process involving EPOCROS™ WS and a carboxy group-containing emulsion with a specific neutralization rate.
- It offers lower curing temperature, excellent storage stability, no peeling and long pot life for one packaging.
- It provides film properties, low toxicity, fast drying and improved water- & heat resistance.
- EPOCROS™ WS-700 allows crosslinking reaction at low temperature (80-120°C) and without any by-product.
- It exhibits high reactivity and performance expression with even small addition.
- It offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC).
- Recommended for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing.
- It is registered with CSCA (Japan), TSCA (USA), REACH EU and IECSC (China) regulations.
- Support available
- Original documents
EPOCROS™ WS-300
by Nippon Shokubai
EPOCROS™ WS-300 by Nippon Shokubai is a VOC-free adhesion promoter and waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. The new crosslinking technology enhances the reactivity between oxazoline groups and carboxy groups through a heating and mixing process involving EPOCROS™ WS and a carboxy group-containing emulsion with a specific neutralization rate.
- It offers lower curing temperature, excellent storage stability, no peeling and long pot life for one packaging.
- It provides film properties, low toxicity, fast drying and improved water- & heat resistance.
- It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC).
- It exhibits controllable appearance by glass transition temperature adjustment and crosslinking reaction at low temperature (80-120°C) with no by-product.
- It offers high reactivity and performance expression with even small addition.
- EPOCROS™ WS-300 is designed for coatings (metals, films, paper, plastics, leather), primer (film, plastics, building materials, automobiles, PVB inks), paints, inks and pigment printing.
- It is registered with CSCA(Japan) and TSCA(USA) regulations.
- Support available
- Original documents
WANNATE® HB-75MX
by Wanhua Chemical
WANNATE® HB-75MX by Wanhua Chemical is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% of 1-methoxy-2-propyl acetate (MPA) and xylene (1:1). It exhibits high chemical- and weathering resistance, very good gloss retention and outstanding mechanical properties. It can be mixed with aliphatic- and aromatic polyisocyanates, polyester polyols and polyacrylates.
- It can be used as the hardener component for lightfast two-component polyurethane coatings.
- WANNATE® HB-75MX is suitable for automotive refinishing, transportation, industrial finishing and plastic coatings.
- Support available
- Original documents
DURANATE™ 24A-100
by DKSH
DURANATE™ 24A-100 distributed by DKSH is a high-performance aliphatic polyisocyanate. This versatile product is composed of hexamethylene diisocyanate (HDI) and is renowned for its exceptional durability and resistance to weathering.
- It is designed to enhance the longevity and aesthetic appeal of your products, making it an ideal choice for industries seeking superior quality and performance.
- It features a high NCO content, lower viscosity, good coating film appearance and excellent adhesion.
- DURANATE™ 24A-100 is suitable for two-component applications, including plastic coatings, automotive refinishes, automobile and motorcycle base coats and top coats, as well as heavy-duty coatings.
- It is available in Canada.
- Support available
- Original documents
SYLOID® C 803
by DKSH
SYLOID® C 803 distributed by DKSH is a high porosity, easily dispersible untreated amorphous silica-based matting agent. Due to its relatively fine particle size, it imparts excellent surface smoothness to the coating film.
- It is used for matting of thin film systems including artificial and natural leather coatings, thin film coatings for plastics and coatings for foils and laminations.
- SYLOID® C 803 has a shelf life of 12 months.
- It is available in Europe.
- Support available
- Original documents
