Styrene Resins for Coatings and Inks

VISCOPOL™ 6180 by allnex is a low foaming, very hard, anionic polystyrene emulsion grade. It offers excellent water and grease resistance. It provides excellent gloss, adhesion and mechanical shear stability. It has excellent block resistance and transfer properties with wide solvent tolerance. VISCOPOL™ 6180 is used in both flexographic & gravure printing inks, overprint lacquers, paper & board coatings and water based OPVs targeting graphics applications. It has a shelf life of 12 months.

LIPATON™ SB 49B40 distributed by DKSH is a binder for sealants and anti-corrossion paints.

• It is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
• It is used for the manufacture of flexible one-component liquid-applied damp proof membranes.
• It is specially designed to meet environmental market requirements.
• It exhibits low water uptake and reduced water permeability.
• It forms an elastic polymer film with good adhesion to mineral surfaces.
• It is mainly applied in filler-compounded membranes used as waterproofing systems under tiles.
• It is compatible with most common fillers, extenders, and pigments.
• LIPATON™ SB 49B40 has a shelf life of 6 months.
• It is available in Europe and Asia/Pacific regions.(Denmark, Philippines, Thailand, Sweden, Norway, Finland, Iceland, Estonia, Latvia, Lithuania, Cambodia, Indonesia, Myanmar, USA).
• It has application in paint, coating and construction.
• It is APEO-free and has a reduced level of VOC.

AXILAT™ PSB 150 distributed by DKSH is a redispersible powder for dry mix. It is a styrene butadiene copolymer powder resin.

• It redisperses to a particle size that is one-tenth of conventional latex powders, resulting in a very high binder power and enhanced adhesion for end use formulations.
• It is highly recommended for gypsum-based applications.
• AXILAT™ PSB 150 has a shelf life of 6 months.
• It has very good alkali resistance.
• It has an ecologically friendly profile (no plasticizers, no solvents and no alkylphenol ethoxylated components).
• It is available in APAC Region(Cambodia, Denmark, Estonia, Finland, Iceland, Latvia, Lithuania, Myanmar, Norway, Philippines, Sweden, Thailand, Vietnam).
• It has application in paints, coating and construction.

LIPATON™ SB 47B40 distributed by DKSH is a binder for sealants and anti-corrossion paints.

• It is an anionic, carboxylated styrene-butadiene copolymer latex containing a non-staining antioxidant.
• It is used for the manufacture of flexible 1-component liquid applied damp proof membranes.
• It is designed to meet the environmental requirements of the market.
• It exhibits low water uptake and reduced water permeability.
• It is compatible with most of the common fillers, extenders and pigments.
• It is widely used in construction, paints and coating.
• LIPATON™ SB 47B40 is available in APAC Region (Denmark, Philippines, Thailand, Sweden, Norway, Finland, Iceland, Estonia, Latvia, Lithuania, Cambodia, Indonesia, Myanmar, USA).

Butofan® 2469 by BASF is cold polymerized butadiene/styrene dispersion. It can be protected from microbial attack by adding preservative, if pH lies in the neutral range. Butofan® 2469 is recommended for coating applications.

LIPATON SB 29Y57 distributed by DKSH is used for modification of hydraulic binders.

• It is a water-based non-ionically stabilized hydrolysis-resistant dispersion of a carboxylated styrene-butadiene copolymer contains an antioxidant, a defoamer and is compatible with most hydraulic binders.
• It is free from APEOs and plasticizer.
• It is available in APAC Region(Denmark, Philippines, Thailand, Sweden, Finland, Norway, Estonia, Latvia, Lithuania, Iceland, Cambodia, Indonesia, Myanmar).
• LIPATON SB 29Y57 has a shelf life of 12 month.
• It is widely used in paints, coating and construction applications.
• It has applications including repair mortar, flooring, rendering, bonding.

LIPATON XA 562 distributed by DKSH is an aqueous high solids dispersion of a styrene-butadiene copolymer.

• It contains a cationic emulsifier system, is free from solvents and plasticizers and does not contain antioxidant.
• It is a cationic synthetic SBR latex.
• It has exceptionally high solids content and a very low glass transition temperature.
• It is especially suitable for modification of cationic bitumen emulsions used in road maintenance.
• It is available in APAC Region(Cambodia, Indonesia, Myanmar, Thailand).
• LIPATON XA 562 has a shelf life of 6 month.
• It is widely used in paints, coating and construction applications.
• It is free from solvents, plasticizers and does not contain antioxidant.

Kraton™ D1102 ET by KRATON is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It exhibits an excellent low-temperature flexibility and elasticity while providing superior resistance to asphalt rutting and cracking.

• It offers high strength and low viscosity for easy thermoplastic melt processing.
• It is suitable for coatings.
• Kraton™ D1102 ET is FDA compliant.

Kraton™ D1116 KIM by KRATON is a clear, radial triblock copolymer based on styrene and butadiene, with a polystyrene content of 23%. It provides superior resistance to asphalt rutting and cracking. It possesses an excellent low-temperature flexibility and elasticity.

• . It offers excellent high strength and low viscosity for easy thermoplastic melt processing.
• It is recommended for formulating coatings.
• Kraton™ D1116 KIM is FDA compliant.

Kraton™ D1101 MU by KRATON is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It offers versatility with high strength, broad hardness range, and low viscosity for efficient thermoplastic melt processing.

• It possesses an excellent low-temperature flexibility and elasticity.
• It provides superior resistance to asphalt rutting and cracking.
• Kraton™ D1101 MU is suitable for coatings.