Coating ingredients for Transportation Coatings

DEGALAN® LP 64/12 distributed by DKSH is a versatile binder methacrylates. It exhibits weather- and chemical resistance and lightfastness.

• It is used in UV-printing inks, aerosol, marine & container coatings, primers, impregnations, exterior house-, masonry- and road marking paints.
It is blendable with alcohol and possesses good adhesion to various substrates such as plastics, paper, textiles and metal.
• It is also designed for penetrating primers, concrete- and protective coatings.
• It is compatible with most PVC copolymers, PS, PC, PMMA, ABS, ester-soluble nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/ acetopropionate and partly compatible with alkyd and epoxy ester resins.
• It has a shelf life of 5 years.
• DEGALAN® LP 64/12 is available in Canada.

DEGALAN® 64/12 N distributed by DKSH is a granulated polymer based on methacrylates. It is versatile binder for concrete- and thick-layer metal coatings. It exhibits weather- and chemical resistance and lightfastness.

• It is used in marine & container coatings, primers, impregnations, exterior house- and road marking paints and plastic coatings.
• It is compatible with most PVC copolymers, nitrocellulose, chlorinated rubber, plasticizer, cellulose acetobutyrates/acetopropionate and partly compatible with alkyd and epoxy ester resins.
• DEGALAN® 64/12 N has a shelf life of 5 years and is available in Indonesia, Philippines, Vietnam, Belgium, Netherlands and Luxembourg.

WANNATE® HB-75MX by Wanhua Chemical is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% of 1-methoxy-2-propyl acetate (MPA) and xylene (1:1). It exhibits high chemical- and weathering resistance, very good gloss retention and outstanding mechanical properties. It can be mixed with aliphatic- and aromatic polyisocyanates, polyester polyols and polyacrylates.

• It can be used as the hardener component for lightfast two-component polyurethane coatings.
• WANNATE® HB-75MX is suitable for automotive refinishing, transportation, industrial finishing and plastic coatings.

THIXATROL® ST by Elementis acts as a rheological additive for use in aliphatic and aromatic solvent-based coatings. It is an organically modified castor oil derivative. It provides increased viscosity, thixotropy, pigment suspension and sag control. It improves the flow and leveling of powder coatings. It is suitable for chlorinated rubber- and decorative coatings, traffic- and anti-fouling paints.

• It offers controlled penetration into porous substrates and imparts excellent package stability and reproducibility.
• It shows no adverse effect on paint durability and no influence on water-resistance of organic systems.
• It is non-yellowing in the final formulation and does not normally react with system components.
• THIXATROL® ST is used in epoxies, polyurethanes, varnishes, air dry industrial-, high build- and hammer finishes.
• The recommended dosage level is 0.2-0.8% by weight.
• It has a shelf life of 4 years.

Bentone® 34 by Elementis acts as a rheological additive designed for low to intermediate polarity organic systems. It is an organic derivative of a bentonite clay. It prevents pigment settling during storage and syneresis in thixotropic systems.

• It improves flow and leveling and controls sagging on vertical surfaces and penetration on porous substrates.
• It increases viscosity and provides thixotropy.
• It is used for anti-corrosive paints, automotive finishes, coil coating systems, dip coatings and industrial finishes.
• Also used in interior and exterior house paints including do-it-yourself paints, paint stripper pastes, printing inks, refinishes for household appliances and road marking paints.
• Recommended dosage level is 0.2-0.5% for house and industrial paints, 0.5-1% for primer and 0.2-0.3 for aqueous systems.
• Bentone® 34 has a shelf life of 4 years.

WANNATE® HT-100 by Wanhua Chemical is a solvent-free, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component for lightfast two-component polyurethane coatings. It offers high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.

• WANNATE® HT-100 is suitable for automotive refinishing, transportation, industrial finishing and plastic coatings.
• It can be mixed with aliphatic- and aromatic polyisocyanates, polyester polyols and polyacrylates.

WANNATE® HB-200 by Wanhua Chemical is an aliphatic biuret polyisocyanate based on 1,6-hexamethylene diisocyanate (HDI). It can be used as a hardener component for lightfast two-component polyurethane coatings. It offers high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.

• It can be mixed with aliphatic and aromatic polyisocyanates, polyester polyols and polyacrylates.
• WANNATE® HB-200 is suitable for automotive refinishing, transportation, industrial finishing and plastic coatings.

WANNATE® HT-3100plus by Wanhua Chemical is a solvent-free, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component for lightfast two-component polyurethane coatings. It offers high resistance to chemicals and weathering, excellent gloss retention, and outstanding mechanical properties.

• It is best used with polyacrylates or polyester polyols or alkyd resins as co-reactants.
• It shows compatibility with aliphatic and aromatic polyisocyanates.
• WANNATE® HT-3100plus is recommended for industrial finishing, automotive refinishing, transportation and plastic coatings, especially in high-solids, solvent-free and water-borne systems.

WANNATE® HT-600 by Wanhua Chemical is a low-viscosity, solvent-free, polyfunctional aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component for lightfast two-component polyurethane coatings. It exhibits high chemical and weathering resistance, very good gloss retention and outstanding mechanical properties.

• It shows compatibility with aliphatic- and aromatic polyisocyanates, polyester polyols and polyacrylates.
• WANNATE® HT-600 is suitable for automotive- OEM and refinishing, transportation, industrial finishing and plastics coatings.

WANNATE® HT-600plus by Wanhua Chemical is a low-viscosity, solvent-free, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as a hardener component for lightfast two-component polyurethane coatings. It is designed for automotive refinishing, transportation, industrial finishing and plastic coatings.

• It offers high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties.
• WANNATE® HT-600plus can be mixed with aliphatic- and aromatic polyisocyanates, polyester polyols and polyacrylates.