Adhesive ingredients for Pressure Sensitive Adhesives (PSA)

EPOCROS™ WS-700 by Nippon Shokubai is a VOC-free adhesion promoter and a waterborne crosslinking agent based on acrylic, high oxazoline functionalized reactive copolymer. It offers crosslinking reaction at low temperature (80-120°C) and without any by-product. It exhibits high reactivity with carboxyl groups and performance expression with even small addition.

• It provides improved film strength, low toxicity, fast drying and improved water-, heat- & solvent resistance.
• It also offers excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC).
• It is recommended for pressure-sensitive adhesives.
• It is registered with CSCA (Japan), TSCA (USA), REACH EU (EEA) and pre-registered with KECL (Korea) regulations.
• EPOCROS™ WS-700 is one-pack type with long pot life.

EPOCROS™ WS-500 by Nippon Shokubai is a water soluble crosslinker and adhesion promoter. It is a standard acrylic-based oxazoline functionalized reactive copolymer. It offers high reactivity with carboxyl groups and performance expression with even small addition. It exhibits crosslinking reaction at low temperature (80-120°C) with no by-product.

• It offers improved film strength, low toxicity, fast drying and improved water-, heat- & solvent resistance.
• It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC).
• It is used in pressure-sensitive adhesives.
• It is registered with CSCA (Japan), TSCA (USA), REACH EU (EEA) and pre-registered with KECL (Korea) regulations.
• EPOCROS™ WS-500 is one-pack type with long pot life.

EPOCROS™ K-2010E by Nippon Shokubai is a low toxic, water-based crosslinking agent and adhesion promoter. It is a soft, VVOC-free, styrene/acrylic-based oxazoline functionalized reactive copolymer. It offers fast drying as well as improved film strength and water-, solvent- & heat resistance. It is a one-pack type with long usage time.

• It shows excellent adhesion particularly to polyester such as PET and a controllable appearance by glass transition temperature adjustment.
• It provides crosslinking reaction at low temperature (80-120°C) and without any by-product.
• It exhibits high reactivity with carboxyl groups and performance expression with even small addition.
• EPOCROS™ K-2010E is used in pressure-sensitive adhesives.
• It is registered with CSCA (Japan), TSCA (USA), REACH EU (EEA) and pre-registered with KECL (Korea) regulations.

NYAD® 5000 WOLLASTOCOAT® by Imerys is wollastonite mineral grade. It is a naturally occurring- and non-hazardous mineral of premium quality. Exhibits no evidence of any significant health risks to workers based upon toxicological studies. Provides improved adhesion, reinforcement and cost control over glass. NYAD® 5000 WOLLASTOCOAT® is used in structural-, high temperature-, pressure-sensitive-, hot-melt-, heat activated- and UV curable adhesives.

NYAD® M1250 by Imerys is highly-pure and ultra-fine wollastonite mineral grade. It is a naturally occurring and non-hazardous mineral of premium quality.

• Provides improved adhesion, reinforcement and cost control over glass.
• NYAD® M1250 is used in structural-, high temperature-, pressure-sensitive-, hot-melt-, heat activated- and UV curable adhesives.

NYAD® MG by Imerys is wollastonite. It is a naturally occurring- and non-hazardous mineral of premium quality. Provides improved adhesion, reinforcement and cost control over glass. Used in structural-, high temperature-, pressure-sensitive-, hot-melt-, heat activated- and UV curable adhesives.

EPOCROS™ K-2035E by Nippon Shokubai is a hard, low toxic, VVOC-free, waterborne crosslinking agent and adhesion promoter based on styrene/acrylic oxazoline functionalized reactive copolymer. It exhibits high reactivity with carboxyl groups and crosslinking reaction at low temperature (80-120°C) with no by-product. It is one-pack type with long pot life.

• Offers improved film strength and fast drying along with improved water-, heat- & solvent resistance.
• It possesses a controllable appearance by adjusting glass transition temperature.
• It shows excellent adhesion particularly to polyester such as PET.
• EPOCROS™ K-2035E is recommended for use in pressure-sensitive adhesives.
• It is registered with CSCA (Japan), TSCA (USA), REACH EU (EEA) and pre-registered with KECL (Korea) regulations.

EPOCROS™ WS-300 by Nippon Shokubai is a VOC-free adhesion promoter and waterborne crosslinking agent. It is an acrylic-based, high oxazoline functionalized reactive copolymer. It provides improved film strength, low toxicity, fast drying and improved water-, heat- & solvent resistance. It shows excellent adhesion to polyethylene terephthalate (PET), oriented polypropylene (OPP) and polyvinyl chloride (PVC).

• It exhibits controllable appearance by glass transition temperature adjustment, and crosslinking reaction at low temperature (80-120°C) with no by-product.
• It exhibits high reactivity with carboxyl groups and performance expression with even small addition.
• EPOCROS™ WS-300 is used in pressure-sensitive adhesives.
• It is a one-pack type with long pot life.
• It is registered with CSCA (Japan) and TSCA (USA) and pre-registered with KECL (Korea) regulations.

EPOCROS™ K-2020E by Nippon Shokubai acts as an adhesion promoter and crosslinking agent. It is a VVOC-free, waterborne, styrene/acrylic-based oxazoline functionalized reactive copolymer. It provides improved film strength, fast drying and improved water-, heat- & solvent resistance. It exhibits high reactivity with carboxyl groups and performance expression with even small addition.

• It is a one-pack type with long usage time.
• It shows excellent adhesion particularly to polyester such as PET and controllable appearance by glass transition temperature adjustment.
• It allows crosslinking reaction at low temperature (80-120°C) and without any by-product.
• EPOCROS™ K-2020E is designed for use in pressure-sensitive adhesives.
• It is registered with CSCA (Japan) and TSCA (USA) regulations.

NYAD® G WOLLASTOCOAT® by Imerys is wollastonite mineral grade. It is a naturally occurring- and non-hazardous mineral of premium quality. Exhibits no evidence of any significant health risks to workers based upon toxicological studies. Provides improved adhesion, reinforcement and cost control over glass. NYAD® G WOLLASTOCOAT® is used in structural-, high temperature-, pressure sensitive-, hot-melt-, heat activated- and UV curable adhesives.