Return to supplier page
Suprmix® 1312 LV by Hallstar is a butadiene-acrylonitrile grade. It is compatible with nitriles and polychloroprene. It is suitable for adhesives and sealants. Suprmix® CUMAR® P-10 by Hallstar is a dry, coumarone indene resin-based on plasticizer. It offers low softening point that helps in lowering high viscosities.<br>
<ul style="padding-left: 40px;"><li>Being an extremely “viscous liquid”, it is a highly absorbent amorphous silica carrier.</li><li>Being a free flowing powder, it is easy to handle and weigh.</li><li>It eliminates drum disposal and need for heating viscous liquid.</li><li>It improves batch incorporation time and tack & green strength.</li><li>It reduces waste and clean up time.</li><li>It is compatible with most elastomers, natural rubber, nitrile and SBR.</li><li>It is suitable for adhesives.</li>Suprmix® CUMAR® P-10 complies with USA compliance.</li></ul> Suprmix® CUMAR® P-25 by Hallstar is a coumarone indene resin. Acts as a plasticizer. Compatible with most elastomers. Suprmix® CUMAR® P-25 by Hallstar is suitable for adhesives and sealants. Trially cyanurate. Acts as an effective co-agent or crosslinking agent for the peroxide cure. It gives higher yield on usage. Compatible with chlorinated rubber, EPDM, natural rubber, epoxy, nitrile, polyester resin, polyvinyl chloride and SBR. It is a free flowing powder to improve handling. Eliminates need for heating viscous liquid, odor caused by sulfur co-agent and drum disposal. Improves heat aging, compression set resistance and batch incorporation time. Also improves clean up time and reduces scorch as well as waste. Suprmix® EPON® 828 by Hallstar is an epoxy resin made from bisphenol-A and epichlorohydrin. Exhibits excellent mechanical, dielectric, adhesive properties and chemical resistance when hardened or cross-linked with curing agents. Used as a tackifier, cross-linker and adhesion promoter. It improves batch incorporation time, handling while reducing wastage. Compatible with nitrile-based compounds. It acts as a polyester plasticizer on hydrated silica. Provides higher yield on usage. Compatible with acrylic rubber, cellulose nitrate, chlorinated rubber, chlorosulfonated polyethylene, epichlorohydrin, nitrile and polyvinyl chloride. Offers an excellent resistance to migration. It eliminates need for heating viscous liquid and drum disposal. It improves batch incorporation time and reduces clean up time, employee exposure as well as waste. Used in automotive sealant applications. Butadiene-acrylonitrile copolymer. Used as plasticizer. Eliminates need for heating viscous liquid. Reduces clean up time. Coumarone indene resin. Used as plasticizer. Possesses elimination of thick residue disposal. Exhibits higher yield on usage. Epoxy resin. Used as crosslinking agent. Offers good mechanical, adhesive, electrical, and chemically resistant properties. Eliminates need for heating viscous liquid. Produces higher yields on usage. Reduces clean up time.
SUPRMIX®
Adhesive ingredients supplied by Hallstar
9 Products match your search
Suprmix® 1312 LV
by Hallstar
Suprmix® CUMAR® P-10
by Hallstar
Suprmix® CUMAR® P-25
by Hallstar
Suprmix® TAC
by Hallstar
Suprmix® EPON® 828
by Hallstar
Suprmix® HPPM-100
by Hallstar
Suprmix® Nipol 1312
by Hallstar
Suprmix® CI-25
by Hallstar
Suprmix® Hallco Epoxy Resin
by Hallstar
Showper page