Return to supplier page
AQUACER® 1063 by BYK is a polyethylene primary dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in aqueous dispersion adhesives for the packaging sector. <br> <ul style="padding-left: 40px;">
<li> It is used as an anti-blocking additive in the manufacture of hot-melt adhesives (hot-melts) during underwater pelletizing to obtain a free-flowing, non-sticky granulates.</li>
<li> It is added directly into the cooling water and is therefore easy to handle and dust-free. </li>
<li>When bonding foil-laminated surfaces with paper or cardboard, it improves the adhesion of the laminated side. </li>
<li>It exhibits good adhesion even at low temperatures.</li>
<li>It shows no discoloration when bonding systems are stored at higher temperatures.</li>
<li>It complies with REACH, EU No. 10/2011, BfR XXXVI, FDA 21 CFR 176.170 and FDA 21 CFR 176.180.</li>
<li> Recommended dosage level is 0.5-5% (hot-melt adhesive) and 10-50% (in packaging). </li>
<li> AQUACER® 1063 has a shelf life of 15 months. </li></ul> AQUACER® 581 by BYK is a non-ionic emulsion of carnauba wax. It is an anti-caking additive for hotmelts. AQUACER® 581 is a temperature sensitive grade and temperature for transport and storage must be between 5°C and 35°C. It improves the surface properties like slip, scratch resistance, abrasion resistance and anti-blocking of water-borne formulations. AQUACER® 531 by BYK is a non-ionic emulsion based on a modified polyethylene wax. It is an anti-caking and anti-blocking additive for hotmelts. AQUACER® 531 is a temperature sensitive grade and temperature for transport and storage must be between 5°C and 35°C. It improves the surface properties like slip, scratch resistance and rub resistance. Recommended dosage is 0.5-5% based upon amount of water in the cooling circuit.
AQUACER®
Adhesive ingredients supplied by BYK
3 Products match your search
AQUACER® 1063
by BYK
- Sustainable option
AQUACER® 581
by BYK
AQUACER® 531
by BYK
Showper page