HORDAMER® PE 02 by BYK is a primary dispersion of polyethylene with an anionic emulsifier. Acts as a defoamer, adhesion promoter and wetting agent. It is cost-effective process, can be used with standard equipment and no additional working step is necessary in it. During its storage the pH value may drop to a value as low as pH 8 but product performance is not affected. During the production of hot melts and soft thermoplastics (TPE and TPU), HORDAMER® PE 02 is used in underwater pelletizing to yield free-flowing granules that do not stick. It is directly added to the cooling water and additional use of a defoamer is recommended. It improves adhesion to PE substrates in emulsion adhesives. Its typical dosage is between 1- 4 % as supplied based on cooling water quantity.
Product family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
No data available
For which system
Availability
Product Status:Visible After Login
HORDAMER® PE 02 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Non-volatile Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |