Return to supplier page
PowerStab™ 7794 by TinToll (PCC Group) is a hindered amine light stabilizer (HALS). It is a blend of bis(2,2,6,6,-tetramethyl-4-piperidinyl) decanedioate and N,N’-bis (2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4,6-trichloro-1,3,5-triazine and 2,4,4-trimethyl-1,2-pentanamine. It is compatible with styrenic polymers such as ABS and impact polystyrene. It is good for thick applications. PowerStab™ 7794 is especially suitable for the protection of polyolefins (PP, PE, PP/EPDM and PP/PE/EPDM blends) from damage of UV radiation. PowerStab™ 3853PP5 by TinToll (SINOPCC Group) is a blend of fatty acids, C12-21 and C18-unsaturated,2,2,6,6-tetramethyl-4-piperidinyl. It is a 50% active concentrate of hindered amine light stabilizer (HALS). It is suitable for film, tapes and injection molding. It is available in white crystalline or granular form. PowerStab™ 3853PP5 is recommended for PP outdoor furniture, TPO automotive exterior and interior parts and TPO roofing membranes. PowerStab™ 3853 by TinToll (SINOPCC Group) is a hindered amine light stabilizer (HALS). It is a fatty acid, C12-21 and C18-unsaturated,2,2,6,6-tetramethyl-4-piperidinyl stearate. It is available in white powder form. It is suitable with PP outdoor furniture, TPO automotive parts, TPO roofing membranes, PE crates, polyacetals, polyamides, styrenic polymers and PUR. PowerStab™ 3853 is designed for films, tape and injection molding applications. PowerStab™ 770 by TinToll (PCC Group) is a bis(2,2,6,6,-tetramethyl-4-piperidyl)sebaceate. It is a low molecular weight hindered amine light stabilizer (HALS). It provides excellent light stability for thick sections but can also be used for articles with a high surface area such as films and tapes. It is available in white colored crystalline granule form. PowerStab™ 770 is recommended to use in polypropylene, impact modified PP (TPO), EPDM, polystyrene, impact polystyrene, ABS, SAN, ASA, polyurethanes, polyamides and polyacetals. PowerStab™ 945 by TinToll (PCC Group) is a hindered amine light stabilizer (HALS). It is a N, N’-bisformyl-N,N’-bis-(2,2,6,6-tetramethyl-4-piperidinyl)-hexamethylendiamine. PowerStab™ 945 shows excellent thermal stability and high compatibility with pigments.<br>
<ul style="padding-left: 40px;"><li>It is available in white powder form.</li>
<li>It is suitable for polyolefins, particularly in thick-walled PP molding and PP fibers, thin films, nylon, ABS, PA, PS and polyester.</li></ul> PowerStab™ 119 by TinToll (PCC Group) is a high molecular weight hindered amine light stabilizer (HALS). It is a 1,5,8,12-tetrakis[4,6-bis(n-butyl-n-1,2,2,6,6-pentamethyl-4-piperidylamino)-1,3,5-triazin-2-yl]-1,5,8,12-tetraazadodecane. It provides good thermal oxidative- and light stability.<br>
<ul style="padding-left: 40px;"><li>It is compatible with polyolefins (PE, PP), TPO, styrenic polymers (ABS, ASA), polyamide fibers, polyurethane and elastomers.</li>
<li>PowerStab™ 119 is suitable for PE-based agricultural films, PP fibers, talc-filled PP and TPO automotive parts.</li></ul> PowerStab™ NDBC by TinToll (PCC Group) is a nickel (II) dibutyldithiocarbamate-based nickel quencher light stabilizer. It is soluble in chloroform, benzene and carbon bisulfide. It is slightly soluble in acetone and insoluble in water. It improves heat resistance and is available in olive-green colored powder form. PowerStab™ NDBC is compatible with SBR, CR, chlorosul-fonated polyethylene rubber to avoid rubber crack under ozone and sunshine. PowerStab™ 944 by TinToll (PCC Group) is a poly[[6-[(1,1,3,3-tetramethylbutyl) amino]-1,3,5-triazine-2,4-diyl] [(2,2,6,6-tetramethyl4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]). It is a polymeric hindered amine light stabilizer. It exhibits excellent light stabilization performance in polyolefins (thin- and thick-section), low volatility and excellent resistance to migration. It is compatible with PE, PP, TPO, polyamide fibers, flexible and rigid PVC, styrenic, xylene XLDPE, TPE’s and polyurethanes. PowerStab™ 944 is suitable for injection molding, film, fibers and tapes. PowerStab™ 622 by TinToll (PCC Group) is a dimethyl succinate polymer with 4-hydroxy-2,2,6,6-tetramethyl-1-piperidine ethanol. It is a non-discoloring, polymeric hindered amine light stabilizer (HALS). It offers low volatility, excellent resistance to migration, low basicity for reduced interactions with pigment and other stabilizers. It is compatible with EVA, PP fibers, polyurethane, polyacetals and elastomers. PowerStab™ 622 is suitable for PE applications such as injection molding, rotational molding, film and tape. Recommended dosage level is 0.05-1.5%. It is FDA-approved. PowerStab™ 292 by TinToll (PCC Group) is a blend of bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate and 1-(methyl)-8-(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate. It is a low molecular weight, excellent hindered amine light stabilizer (HALS). It is available in light yellow viscous liquid form. It is soluble in butylcarbitol, depanol J, hexanedioldiacrylate, 1-methoxyprpylacetate-2 and trimethylolpropanetriacrylate. It is compatible with polyurethanes, elastomers, flexible PVC, styrenic polymers (ABS, ASA), acrylics and unsaturated polyesters. PowerStab™ 292 is suitable for plastisols and liquid masterbatches for plastics.
PowerStab™
Polymer additives supplied by TinToll (SINOPCC Group)
12 Products match your search
PowerStab™ 7794
by TinToll (SINOPCC Group)
PowerStab™ 3853PP5
by TinToll (SINOPCC Group)
PowerStab™ 3853
by TinToll (SINOPCC Group)
PowerStab™ 770
by TinToll (SINOPCC Group)
PowerStab™ 945
by TinToll (SINOPCC Group)
PowerStab™ 119
by TinToll (SINOPCC Group)
PowerStab™ NDBC
by TinToll (SINOPCC Group)
PowerStab™ 944
by TinToll (SINOPCC Group)
- Sustainable option
PowerStab™ 622
by TinToll (SINOPCC Group)
- Sustainable option