About The R.J. Marshall Company

The R.J. Marshall Company, established in 1978 and headquartered in Southfield, Michigan, is a reputable supplier well-known for its innovative contributions in the field of polymer additives. Their expertise in the domain ensures that polymers not only meet but exceed the performance and regulatory requirements. The R.J. Marshall Company has made significant contributions by offering a comprehensive range of flame retardants, smoke suppressants, and mineral-based additives. These products are crucial in enhancing the safety, durability, and functionality of polymers used in various industry applications, from construction materials to consumer goods.

AH255

AH255 by The R.J. Marshall Company is a low-cost flame retardant. It is non-toxic, halogen-free, chemically inert and has low abrasiveness. It can be used in a wide range of polymers at processing temperatures below 220°C. It acts as a heat sink thereby retarding pyrolysis and reducing the burning rate. The water vapor released has an added effect of diluting combustion gases and toxic fumes. It gives benefits like an arc and tracks resistance in plastics exposed to electrical arcing, acid resistance and smoke suppression. It begins to decompose endothermically releasing approximately 35% of its weight as water vapor at about 220°C. AH255 finds application in composites.

Sustainable option

See the product

Maxfil® MX200

Maxfil® MX200 by The R.J. Marshall Company is an engineered alumina trihydrate (ATH) flame retardant filler created for maximum filler loadings, extremely low viscosities, increased flame retardance and decreased formulation costs. It can achieve better glass wet-out, help reduce shrinkage and warpage. It also enhances the ability to achieve UL 94-VO, UL94 5VA and ASTM E84 Class 1 flame & smoke ratings. Maxfil® MX200 shows a 32% decrease in viscosity over a 45-micron ATH.

See the product

A206

A206 by The R.J. Marshall Company is a low-cost flame retardant. It is non-toxic, halogen-free, chemically inert and has low abrasiveness. It can be used in a wide range of polymers at processing temperatures below 220°C. It acts as a heat sink thereby retarding pyrolysis and reducing the burning rate. The water vapor released has an added effect of diluting combustion gases and toxic fumes. It gives benefits like an arc and tracks resistance in plastics exposed to electrical arcing, acid resistance and smoke suppression. It begins to decompose endothermically releasing approximately 35% of its weight as water vapor at about 220°C. A206 finds application in pultrusion and bulk molding compounds (BMC).