Inovol AF12 by Inovyl permits greater efficiency in the stripper by reducing foam formation and enhancing thermal transfer from stream to polymer slurry.
Developed to effectively reduce foaming that could occur during the discharge of slurry from reactor or during the high temperature stripping of PVC slurry.
Allows trouble free operation of stripping columns. Minimises carry-over of polymer. Inovol AF12 has no negative effect on polymer quality.
Inovol EL25 by Inovyl is an emulsifier. It reduces plastisol viscosity or offers low plastisol viscosities to highly filled formulations. It retains an excellent foam structures of the polymer. It can be used with viscosity reducers and over a wide range of ambient temperature (it owns a low crystallisation temperature). Moreover it guarantees minimum coagulum formation in Mini emulsion, emulsion or Micro suspension operations. That surface active material establishes excellent latex particle size distribution in emulsion PVC.
Partially hydrolysed polyvinyl acetate with a block distribution of hydroxyl groups, offers low toxicity and flammability. It's a water-based secondary for non-condenser cooled processes which allows to save primary suspending agent like PA4.
It's used to guarantee good homogeneity especially for PVC, to enhance strippability, porosity and size distribution. Indeed it optimises tight particle size distribution giving low fine and coarse fractions.
It's recommanded for VA polymers, low k-value PVC grades, low k-value resins and for products requiring good strippability and low residual VCM.
