Return to supplier page
CIREX INT 7 by Airetec is an internal lubricating release agent. It is used in polyester. It is suitable for processing by injection molding. CIREX 8040 by Airetec is a water-based semi-permanent release agent. It helps prevent part deformation. It is designed for mold. CIREX 635 XB2 by Airetec is a semi-permanent water-based release agent with high abrasion resistance. It allows for a large number of releases and reduces buildup. Suitable for mold. CIREX DI 124 by Airetec is a release agent. It is used in epoxy. It is suitable for pultrusion process. CIREX DI 18 by Airetec is a release agent. It is suitable for injection and RTM process. It is used in epoxy. CIREX DI 15 by Airetec is a release agent. It is suitable for polyester and vinylester. CIREX INT 8 PULL by Airetec is an internal lubricating release agent. Its excellent properties allow the profile to slide more easily through the die, thereby improving processing speed while achieving a high-quality surface finish.<br>
<ul style="padding-left: 40px;"><li>The product must be thoroughly mixed with the resin before adding any fillers and is a classic solution in polyester pultrusion. </li>
<li> It allows for unrestricted post-molding operations such as bonding or painting. </li>
<li>The recommended dosage level is 1-2%.</li></ul> CIREX DI 02 by Airetec is an internal lubricating release agent used at very low dosages in gelcoat or polyester resin. It facilitates demolding and significantly delays mold fouling, enhancing productivity. CIREX DI 09 by Airetec is an internal lubricating release agent used at very low dosages primarily in polyester resin. It facilitates demolding and significantly delays mold fouling, enhancing productivity. CIREX DI 03 by Airetec is an internal lubricating release agent that reduces resin thixotropy, thereby promoting fiber wetting. It significantly reduces or can even eliminates the need for external release agents while preventing mold fouling. <br>
<ul style="padding-left: 40px;"><li>In pultrusion applications, its excellent lubricating properties enable profiles to slide more easily through the die, increasing production speed and delivering a high-quality surface finish. </li>
<li>CIREX DI 03 should be thoroughly mixed with the resin before adding any fillers, and post-molding operations such as bonding and painting can be carried out without restriction.</li>
<li>Recommended dosage level is 1%.</li></ul>
CIREX
Polymer additives supplied by Airetec