4,4’ OBSH in a polymeric carrier (15%). Acts as a foaming agent and processing aid. It has a high gas yield, fast response time and generates fine, closed-cell foams which result in moldings & extrusions of high quality. Suitable for structural foam molding, nitrogen foam molding, sink mark elimination, blow molding, extrusion molding, sheet, film & profiles extrusion and rotational molding. Recommended for gas assist molding and gas counter-pressure foam molding. The recommended dosage is 1% for structural foam molding, 0.20% for sink mark elimination, 0.25% for nitrogen foam molding and 0.20% for extrusion & blow molding.
Product family:
Product Type:
| CAS Number | Visible After Login |
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Endex 1040™ properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Volume, CO2 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Inorganic carbonates content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Processing Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |