Single Wall Carbon Nanotubes for Plastic Compounds

Single‑Walled Carbon Nanotubes by Hunan Kela Materials functions as a high-aspect-ratio conductive nanomaterial.

• It is used to create electrical conductivity pathways in insulating polymer matrices.
• It is designed to enable thermal transport through percolated nanotube networks.
• It is suitable for reinforcing composites due to its high aspect ratio and stiffness.
• Single‑Walled Carbon Nanotubes offers charge transport and electron transfer capability in battery and supercapacitor electrodes.
• It provides high-surface-area conductive scaffolds for catalysts and functional nanoparticles.
• It helps in EMI shielding and conductive coating formulations.
• It is used in sensors, flexible electronics and advanced electronic devices requiring controlled conductivity.
• It supports dispersion systems when processed with suitable surfactants or compatibilizers.
• It is suitable for epoxy, polyimide, polystyrene, polyethylene (LDPE, HDPE), polyolefins, polyamides and conjugated polymers.

Nanocyl™ NC1000 by Nanocyl (Birla Carbon) is Single-wall isolated and bundled carbon nanotubes, produced via the catalytic carbon vapor deposition (CCVD) process. Used in applications requiring high specific surface area. Nanocyl™ NC1000 is available in 1-to-10-gram order quantities.

TUBALL™ MATRIX 603 by OCSiAl is a masterbatch based on single wall carbon nanotubes and low aromatic oil-plasticizer (TDAE) as concentrate carrier. Performance of product is based on creating an additional 3D network, embedded into the rubber matrix. Even low dosages have the effect of mechanical properties. After addition, strength, stiffness and abrasion resistance increase, improving cohesion strength, wet grip and fatigue properties, lowering hysteresis losses and adding electrical conductivity. It can be utilized in blends of other rubber and filler products without having to adjust the formulation and technological process. The introduction of TUBALL™ MATRIX 603 into the formula of a rubber mixture is based on adding a specified amount of TUBALL™ MATRIX to the formula for 0.05 to 0.3 wt.%. The shelf life of the product is up to 12 months.

Single wall carbon nanotubes. Used in electronical nanocomponents (diodes, transistors, nano-wires, etc.), field emission, hydrogen storage, rechargeable lithium batteries, atomic force microscope (AFM) tips, electrode material of supercapacitors, biosensors and multi-functional composites (EMI shielding, thermal conducting, strengthen, conducting).

High purity single wall carbon nanotubes. Used in electronical nanocomponents (diodes, transistors, nano-wires, etc.), field emission, hydrogen storage, rechargeable lithium batteries, atomic force microscope (AFM) tips, electrode material of supercapacitors, biosensors and multi-functional composites (EMI shielding, thermal conducting, strengthen, conducting).

TUBALL™ BATT NMP 1% by OCSiAl is a black with a specific smell, liquid dispersion of single wall carbon nanotubes in NMP. It acts as a conductive additive in lithium-ion batteries. It offers boosted energy density, improved adhesion, higher safety, and discharge power. It is used in cathodes, cells, hybrid capacitors, supercapacitors, suspensions and batteries. Its recommended shelf life is 6 months.

TUBALL™ BATT H20 0.8% by OCSiAl is a liquid dispersion of single wall carbon nanotubes in water. It is used as a conductive additive in lithium-ion batteries, pouch cells for mobile phones and for high-energy Si-based anodes. It has low content of foreign impurities, high energy density, fast-charging ability and easy to use facilities. It solves the Si-anode degradation problem by creating a robust network inside the Si anode and provide cycle life that meets the targets of the modern EV industries. It is recommended for anodes, batteries, cells, super capacitors and transportation. Its shelf life is 12 months.

TUBALL™ BATT NMP 0.4% by OCSiAl is a black with a specific smell, liquid dispersion of single wall carbon nanotubes in NMP. It acts as a conductive additive in lithium-ion batteries. It offers boosted energy density, improved adhesion, higher safety, and discharge power. It is used in cathodes, cells, hybrid capacitors, supercapacitors, suspensions and batteries. Its recommended shelf life is 6 months.

TUBALL™ BATT H20 0.4% by OCSiAl is a liquid dispersion of single wall carbon nanotubes in water. It is used as a conductive additive in lithium-ion batteries, pouch cells for mobile phones and for high-energy Si-based anodes. It has low content of foreign impurities, high energy density, fast-charging ability and easy to use facilities. It solves the Si-anode degradation problem by creating a robust network inside the Si anode and provide cycle life that meets the targets of the modern EV industries. It is recommended for anodes, batteries, cells, super capacitors and transportation. Its shelf life is 12 months.

TUBALL™ MATRIX 605 by OCSiAl is an easy-to-handle masterbatch based on graphene nanotubes. It has siloxanes and silicones vinyl group-terminated as concentrate carrier. It is designed for silicone compounds like high consistency rubbers (HCR).

• It provides superior, permanent & uniform electrical conductivity without hot spots at low dosages.
• It offers reduced electrical resistivity of the material, with minimal impact on the host matrix, retaining and improving mechanical properties.
• It enables the production of conductive parts that retain bright colors.
• It minimally increases the density and maintains the color and rheological properties of the uncured compound.
• It can be processed using the standard equipment.
• It can be used to adjust volume resistivity within the range 10–10¹¹ ohm-cm in the final compound.
• The recommended dosage level is 0.5 wt.% for anti-static, conductive and static dissipative applications.
• The shelf life of TUBALL™ MATRIX 605 is up to 18 months.