Return to supplier page
PAXOTHENE® NA208 by USI is a water insoluble, low density polyethylene (LDPE) grade. Exhibits excellent appearance, excellent melt flow characteristic, high gloss, good toughness and stiffness. The resin’s excellent melt flow characteristics permit short cycle time for economical moldings. It can also be ground into powder for coating. It is suitable for processing by injection molding. PAXOTHENE® NA208 is recommended for PE plastic lid for milk powder can, housewares, toys, christmas light sockets or main stems of plastic trees. PAXOTHENE® NA112-27 by USI is a water insoluble low density polyethylene (LDPE) grade. It is formulated with medium slip to give good openability of film. Exhibits low melt index, high gloss, low haze and good toughness especially suitable for films with thickness of 0.020~0.100 mm. Is suitable for processing by blown-film and injection molding. PAXOTHENE® NA112-27 is recommended for the manufacture of shopping bags, frozen bags, re-closable bags and shrink packaging applications. PAXOTHENE® NA205-15 is a water insoluble, low density polyethylene (LDPE) grade. Exhibits excellent heat sealability, Low moisture-vapor transmission rates, good processability, good flow characteristics, low neck-in, high line speed and reduced loss of resin. Possesses excellent adhesion to a variety of porous substrates such as paper as well as non-porous substrates such as cellophane and foil. PAXOTHENE® NA205-15 by USI is suitable for extrusion coating on various substrates such as paper, cellophane, aluminum foil, polyolefin film, polyester film and nylon film. PAXOTHENE® NA207-66 by USI is a water insoluble, low-density polyethylene (LDPE) grade. It is formulated with slip and anti-block agents. Exhibits high melt index, outstanding gloss and excellent flowability especially suitable for films with thickness of 0.010~0.040 mm. It is suitable for processing by blown-film extrusion and injection molding. PAXOTHENE® NA207-66 is used in packaging applications (for suit, bakery, fruit, vegetable, fish, meat, and grocery), can be injection molded into various parts, such as trunk of plastic trees, small parts for toy and stationery. PAXOTHENE® NA248 by USI is a water insoluble, low density polyethylene (LDPE) grade. Exhibits high melt index, excellent melt flow and good flexibility.<br>
<ul style="padding-left: 40px;"><li>The resin’s excellent melt flow makes it fast and economical in production.</li>
<li>It can be easily pigmented to any color by either dry blending or melt blending of the pigment into the resin which makes the products appear genuine and attractive.</li>
<li>Is suitable for processing by injection molding.</li>
<li>PAXOTHENE® NA248 is recommended for artificial flowers, foliages and intricate articles and soft bottles and can lids.</li></ul>
PAXOTHENE®
Plastics and elastomers supplied by USI
5 Products match your search
PAXOTHENE® NA208
by USI
PAXOTHENE® NA112-27
by USI
PAXOTHENE® NA205-15
by USI
PAXOTHENE® NA207-66
by USI
PAXOTHENE® NA248
by USI
Showper page