Return to supplier page
Apigo™ BIO PM 900 by Trinseo is a thermoplastic olefin elastomer (TPO) grade, containing raw materials from renewable sources. Exhibits excellent adhesion and reduction of greenhouse gas emissions such as carbon dioxide (CO<sub>2</sub>). Can be overmolded on polyolefines and on themselves. Suitable for injection molding processing method. Apigo™ BIO PM 900 contains 70% of biomass content. Is possibly used in industry of sports, personal care, building, packaging, furnishing, automotive, clothing, house & toys, hygiene and medical. Complies with European 10/2011/EC standard and American FDA CFR 21 regulations. Apigo™ BIO CA 70 by Trinseo is thermoplastic olefin elastomer (TPO) grade containing raw materials from renewable sources. Exhibits excellent adhesion and reduction of greenhouse gas emissions such as carbon dioxide (CO<sub>2</sub>). Can be overmolded on polyolefines and on themselves. Suitable for injection molding processing method. Apigo™ BIO CA 70 contains 20% of bio mass content. Is possibly used in industry of sports, personal care, building, packaging, furnishing, automotive, clothing, house & toys, hygiene and medical. Complies with European 10/2011/EC standard and American FDA CFR 21 regulations. Apigo™ BIO PM 1300 by Trinseo is thermoplastic olefin elastomer (TPO) grade containing raw materials from renewable sources and 30% of bio mass content. Exhibits excellent adhesion and reduction of greenhouse gas emissions such as carbon dioxide. Can be overmolded on polyolefines and on themselves. Suitable for injection molding processing method. Apigo™ BIO PM 1300 is used in industry of sports, personal care, building, packaging, furnishing, automotive, clothing, house & toys, hygiene and medical. Complies with European 10/2011/EC standard and American FDA CFR 21 regulations. Apigo™ 8376 BS/55 by Trinseo is a (PVC-free) flexible thermoplastic olefin elastomer (TPO) based compound containing raw materials from renewable sources. Is suitable for processing by extrusion. Is an excellent alternative to flexible PVC for halogen-free products. Possesses rigidity lower than conventional polypropylene and allows co-molding to polyolifinic substrate. Shows physical and mechanical properties comparable to conventional TPOs derived from fossil fuels. Allows reduction of CO<sub>2</sub> emissions and greenhouse gases thereby saving fossil resources. Apigo™ 8376 BS/55 exhibits lightness, elasticity, resistance to low temperatures, good range of hardness, elastic modulus, chemical resistance to acids and bases, excellent processability, short molding cycles and easy recycling (100%). Used in building and construction applications, home furnishings, automotive, packaging, electrical domestic appliances, thermo-hydro sanitary, toys, sports footwear (ski boots, inline skates and ice-skates), household products and personal care applications. Complies with European 10/2011/EC standard, FDA and BSI certificate. Apigo™ P 70 by Trinseo is a (PVC-free) flexible thermoplastic olefin elastomer (TPO) based compound containing raw materials from renewable sources. Is suitable for processing by injection molding, extrusion, extrusion-blow molding and over-molding. Is an excellent alternative to flexible PVC for halogen-free products. Possesses rigidity lower than conventional polypropylene and is created for over-molding onto rigid APIGO and polypropylene. Shows physical and mechanical properties comparable to conventional TPOs derived from fossil fuels. Allows reduction of CO<sub>2</sub> emissions and greenhouse gases thereby saving fossil resources. Apigo™ P 70 exhibits lightness, elasticity, resistance to low temperatures, good range of hardness, elastic modulus, chemical resistance to acids and bases, excellent processability, short molding cycles and easy recycling (100%). Used in building and construction applications, home furnishings, automotive, packaging, electrical domestic appliances, thermo-hydro sanitary, toys, sports footwear (ski boots, inline skates and ice-skates), household products and personal care applications. Complies with European 10/2011/EC standard and FDA. Apigo™ E/350 by Trinseo is a thermoplastic olefin elastomer (TPO) based compound containing raw materials from renewable sources. Is suitable for processing by injection molding, extrusion, extrusion-blow molding and over-molding. Is an excellent alternative to flexible PVC for halogen-free products. Possesses rigidity lower than conventional polypropylene and allows co-molding to polyolifinic substrate. Shows physical and mechanical properties comparable to conventional TPOs derived from fossil fuels. Allows reduction of CO<sub>2</sub> emissions and greenhouse gases thereby saving fossil resources. Apigo™ E/350 exhibits lightness, elasticity, good resistance to low temperatures, good range of hardness, good brightness, excellent colorability, elastic modulus, chemical resistance to acids and bases, excellent processability, short molding cycles and easy recycling (100%). Used in building and construction applications, home furnishings, automotive, packaging, electrical domestic appliances, thermo-hydro sanitary, toys, sports footwear (ski boots, inline skates and ice-skates), household products and personal care applications. Complies with European 10/2011/EC standard and FDA. Apigo™ D 55T by Trinseo is a thermoplastic olefin elastomer (TPO) based compound containing raw materials from renewable sources. Is suitable for processing by injection molding, extrusion, extrusion-blow molding and over-molding. Is an excellent alternative to flexible PVC for halogen-free products. Possesses rigidity lower than conventional polypropylene and allows co-molding to polyolifinic substrate. Shows physical and mechanical properties comparable to conventional TPOs derived from fossil fuels. Apigo™ D 55T allows reduction of CO<sub>2 </sub> emissions and greenhouse gases thereby saving fossil resources. Exhibits lightness, elasticity, good resistance to low temperatures, good range of hardness, excellent brightness, excellent transparency, non-stress whitening, elastic modulus, chemical resistance to acids and bases, high processability, short molding cycles and easy recycling (100%). Used in building and construction applications, home furnishings, automotive, packaging, electrical domestic appliances, thermo-hydro sanitary, toys, sports footwear (ski boots, inline skates and ice-skates), household products and personal care applications. Complies with European 10/2011/EC standard and FDA. Apigo™ 8376 BS/70 by Trinseo is a (PVC-free) flexible thermoplastic olefin elastomer (TPO) based compound containing raw materials from renewable sources. Is suitable for processing by extrusion. Is an excellent alternative to flexible PVC for halogen-free products. Possesses rigidity lower than conventional polypropylene and allows co-molding to polyolifinic substrate. Shows physical and mechanical properties comparable to conventional TPOs derived from fossil fuels. Allows reduction of CO<sub>2</sub> emissions and greenhouse gases thereby saving fossil resources. Apigo™ 8376 BS/70 exhibits lightness, elasticity, resistance to low temperatures, good range of hardness, elastic modulus, chemical resistance to acids and bases, excellent processability, short molding cycles and easy recycling (100%). Used in building and construction applications, home furnishings, automotive, packaging, electrical domestic appliances, thermo-hydro sanitary, toys, sports footwear (ski boots, inline skates and ice-skates), household products and personal care applications. Complies with European 10/2011/EC standard, FDA and BSI certificate. Apigo™ BIO CM 680 by Trinseo is a thermoplastic olefin elastomer (TPO) grade, containing raw materials from renewable sources. It exhibits excellent adhesion and reduction of greenhouse gas emissions such as carbon dioxide (CO<sub>2</sub>). It is suitable for extrusion processing method. Apigo™ BIO CM 680 contains 95% of bio mass content. It is used in industry of sports, personal care, building, packaging, furnishing, automotive, clothing, house & toys, hygiene and medical. It complies with European 10/2011/EC standard and American FDA CFR 21 regulations. Apigo™ BIO CM 1100 by Trinseo is a thermoplastic olefin elastomer (TPO) grade, containing raw materials from renewable sources. Exhibits excellent adhesion and reduction of greenhouse gas emissions such as carbon dioxide (CO<sub>2</sub>). Can be overmolded on polyolefines and on themselves. Suitable for injection molding processing method. Apigo™ BIO CM 1100 contains 60% of bio mass content. Is possibly used in industry of sports, personal care, building, packaging, furnishing, automotive, clothing, house & toys, hygiene and medical. Complies with European 10/2011/EC standard and American FDA CFR 21 regulations.
Apigo™
Plastics and elastomers supplied by Trinseo
36 Products match your search
Apigo™ BIO PM 900
by Trinseo
- Sustainable option
Apigo™ BIO CA 70
by Trinseo
- Sustainable option
Apigo™ BIO PM 1300
by Trinseo
- Sustainable option