Return to supplier page
Propak 4017 UV2 by PolyPacific is a medium flow, UV stabilized polypropylene homopolymer grade, reinforced with 35% wollastonite. Exhibits good molding and good surface appearance properties. Propak 4017 UV2 is suitable for processing by injection molding. Used for water filter applications. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001. Propak 7250 UV2 is a low flow, UV stabilized polypropylene homopolymer grade by PolyPacific, reinforced with 20% talc. Exhibits good molding and good surface appearance properties. Propak 7250 UV2 is suitable for processing by injection molding. Used for water filter housing application. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001. Propak C3 200 TF HS is a low to medium flow polypropylene copolymer grade by PolyPacific, reinforced with 20% talc. Exhibits good molding, good surface appearance and good balance of physical properties. Propak C3 200 TF HS is suitable for processing by injection molding. Used in microwave cookware, houseware, kitchen ware and closures. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001. Propak 7021 is a high flow polypropylene homopolymer grade by PolyPacific, reinforced with 40% talc. Exhibits high rigidity, low shrinkage, high stiffness, good molding and low raw material cost. Provides good surface appearance and high heat deflection temperatures. Propak 7021 is suitable for processing by injection molding. Used in microwave dishes, hot fill food packaging, houseware, kitchen ware, appliance housings, closures and retortable medical tray. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001. Propak 1236 by PolyPacific is a low flow polypropylene homopolymer grade by PolyPacific, reinforced with 40% talc. Exhibits good molding and good surface appearance properties. Propak 1236 is suitable for processing by sheet or profile extrusion. Used for food contact applications. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001. Propak 7185 by PolyPacific is a high flow polypropylene copolymer grade by PolyPacific, reinforced with 40% talc. Exhibits high rigidity, low shrinkage, high stiffness, good molding and low raw material cost. Provides good surface appearance and high heat deflection temperatures. Propak 7185 is suitable for processing by injection molding. Used in microwave dishes, hot fill food packaging, houseware, kitchen ware, appliance housings, closures and retortable medical tray. Complies with automotive TS16949, AS 2070, ISO 9001 and 14001.
Propak
Plastics and elastomers supplied by PolyPacific
6 Products match your search
Propak 4017 UV2
by PolyPacific
Propak 7250 UV2
by PolyPacific
Propak C3 200 TF HS
by PolyPacific
Propak 7021
by PolyPacific
Propak 1236
by PolyPacific
Propak 7185
by PolyPacific
Showper page