Return to supplier page
Corton 1094 UVH by PolyPacific is a medium to high flow polypropylene copolymer grade by PolyPacific, reinforced with 20% talc. Exhibits high rigidity, good molding, better surface appearance and dimensional stability. Provides good impact strength and stability to meet continuous outdoor weathering requirements. Corton 1094 UVH is suitable for processing by injection molding. Used for outdoor applications. Complies with automotive TS16949, ISO 9001 and 14001. Corton PDR 1619/4 HS by PolyPacific is a high flow, heat stabilized polypropylene homopolymer grade by PolyPacific, reinforced with 11% barium sulphate. Exhibits high rigidity, gloss, good molding, better surface appearance and greater dimensional stability. Corton PDR 1619/4 HS is suitable for processing by injection molding. Used for toaster housing application. Complies with automotive TS16949, ISO 9001 and 14001. Corton 1737 HSA by PolyPacific is a very high flow polypropylene homopolymer grade, reinforced with 25% mineral. Exhibits high gloss, RTI rating, good molding and better surface appearance. Provides stability to meet automotive heat aging requirements (2000 hours at 130°C). Corton 1737 HSA is suitable for processing by injection molding. Used in appliance applications. Complies with automotive TS16949, ISO 9001 and 14001. Corton 7157 TF HS by PolyPacific is a low flow polypropylene copolymer grade by PolyPacific, reinforced with 20% talc. Exhibits good rigidity, molding, impact strength and better surface appearance. Provides stability to meet automotive heat aging requirements (21 days at 150°C). Corton 7157 TF HS is suitable for processing by blow molding. Used in automotive under bonnet applications such as battery shield air ducts and seals. Complies with automotive TS16949, ISO 9001 and 14001. Corton 1085 HS 70104 by PolyPacific is a high flow polypropylene homopolymer grade, reinforced with 40% talc. Exhibits high rigidity, good molding, better surface appearance and heat resistance. Provides resistance to UV degradation and stability to meet automotive heat aging requirements. Corton 1085 HS 70104 is suitable for processing by injection molding. Used in automotive instrument panel mask applications. Complies with automotive TS16949, ISO 9001 and 14001. Corton C3 300 TF HS by PolyPacific is a low to medium flow polypropylene copolymer grade by PolyPacific, reinforced with 30% talc. Exhibits rigidity, good molding, better surface appearance and good impact strength. Provides stability to meet automotive heat aging requirements. Corton C3 300 TF HS is suitable for processing by injection molding. Used in automotive instrument housings, backcases and outdoor furniture. Complies with automotive TS16949, ISO 9001 and 14001. Corton 200 TF HS by PolyPacific is a polypropylene homopolymer grade by PolyPacific, reinforced with 20% talc. Exhibits low to medium flow, low shrinkage, high stiffness, rigidity, good molding, better surface appearance and dimensional stability. Provides higher heat deflection temperature, low raw material cost and stability to meet automotive heat aging requirements (21 days at 150°C). Corton 200 TF HS is suitable for processing by injection molding. Used in fans/shrouds, appliance housings, furniture, packaging, automotive heater cases and light back-cans. Complies with automotive TS16949, ISO 9001 and 14001. Corton PDR 1629 HS by PolyPacific is a medium to high flow polypropylene homopolymer grade, reinforced with 35% wollastonite. Exhibits rigidity, good molding, better surface appearance and stability to meet automotive heat aging requirements (21 days at 150°C). Corton PDR 1629 HS is suitable for processing by injection molding. Used in automotive trip computer housing. Complies with automotive TS16949, ISO 9001 and 14001. Corton PDR 1623 HS by PolyPacific is a high flow polypropylene grade by PolyPacific, reinforced with 20% mica. Exhibits very high rigidity, good molding, good weld line strength and excellent dimensional stability. Provides better surface appearance and stability to meet automotive heat aging requirements (21 days at 150°C). Corton PDR 1623 HS is suitable for processing by injection molding. Used for air conditioner blower wheel applications. Complies with automotive TS16949, ISO 9001 and 14001. Corton 1078/2 HS UV2 by PolyPacific is a high flow polypropylene copolymer grade, reinforced with 20% talc. Exhibits high rigidity, good molding, better surface appearance, good impact strength and dimensional stability. Provides stability to meet automotive heat aging- and interior weathering requirements. Corton 1078/2 HS UV2 is suitable for processing by injection molding. Used in automotive interior component and trim applications. Complies with automotive TS16949, ISO 9001 and 14001.
Corton
Plastics and elastomers supplied by PolyPacific