Return to supplier page
Epalex 7575 HS UV1 by PolyPacific is a high flow, rubber modified polypropylene grade by PolyPacific, reinforced with mineral. Exhibits good molding, better surface appearance, good rigidity at high ambient temperatures and high impact strength at sub-zero temperatures. Provides stability to meet automotive heat aging- and interior UV requirements. Epalex 7575 HS UV1 is suitable for processing by injection molding. Used for automotive crash pad application. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7025/4 UV3 by PolyPacific is a medium flow, rubber modified polypropylene grade by PolyPacific, reinforced with mineral. Exhibits high impact strength, good molding, better surface appearance, good rigidity at high ambient temperatures and stability for outdoor exposure. Epalex 7025/4 UV3 is suitable for processing by injection molding. Used in automotive applications. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7517 UV3 SAS by PolyPacific is a very high flow, rubber modified polypropylene grade by PolyPacific, reinforced with mineral. Contains an antistatic agent and mold release as an additive. Exhibits low shrinkage, low CLTE, good molding, better surface appearance and good rigidity at high ambient temperatures. Provides high impact strength at sub-zero temperatures and stability for continuous outdoor weathering. Epalex 7517 UV3 SAS is suitable for processing by injection molding. Used for automotive bumper fascia application. Complies with automotive TS16949, ISO 9001 and 14001. Epalex PDR 7386/3 UV3 by PolyPacific is a medium to high flow, rubber modified polypropylene grade by PolyPacific. Exhibits maximum flexibility, low surface hardness, good tear strength and excellent impact strength at low temperatures. Provides stability against continuous outdoor exposure. Epalex PDR 7386/3 UV3 is suitable for processing by injection molding. Used for automotive mud flap application. Complies with automotive TS16949, ISO 9001 and 14001. Epalex PDR 7379 UV1 by PolyPacific is a medium flow, rubber modified polypropylene grade by PolyPacific. Exhibits high impact strength at sub-zero temperatures, good rigidity at high ambient temperatures and stability to provide a low to moderate level of protection from UV radiation. Epalex PDR 7379 UV1 is suitable for processing by injection molding. Used in tote or storage boxes. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7581/3 by PolyPacific is a very low flow, rubber modified polypropylene grade by PolyPacific. Exhibits low gloss, very good tear strength, good flexibility and excellent wear resistance. Epalex 7581/3 is suitable for processing by sheet or profile extrusion. Used for automotive non-carpet floor covering. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7552 by PolyPacific is a very high flow, rubber modified polypropylene grade by PolyPacific, reinforced with mineral. Exhibits low shrinkage, low CLTE, good molding and good rigidity at high ambient temperatures. Provides better surface appearance and high impact strength at sub-zero temperatures. Epalex 7552 is suitable for processing by injection molding. Used for automotive bumper fascia and other automotive exterior applications. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7573 UVH by PolyPacific is a low flow, rubber modified polypropylene grade by PolyPacific. Exhibits high gloss, excellent UV stability, improved mar resistance and stability to provide long term protection against outdoor weathering. Epalex 7573 UVH is suitable for processing by sheet or profile extrusion. Used as a capping layer over polypropylene substrates. Complies with automotive TS16949, ISO 9001 and 14001. Epalex PDR 7413/6 UV3 7A13 by PolyPacific is a very high flow, rubber modified polypropylene grade by PolyPacific, reinforced with mineral. Exhibits high impact strength, low SG, good molding, moderate to high shrinkage and good surface appearance. Provides high rigidity at high ambient temperatures and stability for continuous outdoor exposure. Epalex PDR 7413/6 UV3 7A13 is suitable for processing by injection molding. Used for automotive exterior applications including rocker skirt and bumper fascias. Complies with automotive TS16949, ISO 9001 and 14001. Epalex 7559 HS UV1 by PolyPacific is a high flow, impact modified and coupled polypropylene grade by PolyPacific, reinforced with mineral and 28% glass fiber. Exhibits soft touch haptics, good scratch resistance, high rigidity, good molding, good impact strength and better surface appearance. Provides high heat deflection temperatures and stability to meet automotive interior weathering requirements. Epalex 7559 HS UV1 is suitable for processing by injection molding. Used for automotive interior applications. Complies with automotive TS16949, ISO 9001 and 14001.
Epalex
Plastics and elastomers supplied by PolyPacific