Return to supplier page
LATAN 13 G/30 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 30% glass fibers. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high dimensional stability, mechanical properties, stiffness, thermal stability, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 G/30 is suitable for applications in hot water up to 80-90°C. LATAN 13 G/30 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 9 by LATI is an unfilled polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high mechanical properties, stiffness, thermal stability, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical-, wear-, oxidation- and hydrolysis-resistance. LATAN 9 is suitable for processing by injection molding. Parts made from 9 is suitable for applications in hot water up to 80-90°C. Can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 K/30 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 30% carbon fibers. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses good thermal stability, stiffness, toughness, very good self-lubricating-, tribological- and mechanical-properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 K/30 is suitable for applications in hot water up to 80-90°C. LATAN 13 K/30 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 S/20 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 20% glass beads. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses high dimensional stability, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical-, wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 S/20 is suitable for applications in hot water up to 80-90°C. LATAN 13 S/20 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13E71 by LATI is a polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Provides good elongation and impact resistance. Possesses high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13E71 is suitable for applications in hot water up to 80-90°C. LATAN 13E71 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 by LATI is an unfilled polyoxymethylene (POM) copolymer. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 is suitable for applications in hot water up to 80-90°C. LATAN 13 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 S/15 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 15% glass beads. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses high dimensional stability, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical-, wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 S/15 is suitable for applications in hot water up to 80-90°C. LATAN 13 S/15 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 S/30 by LATI is a polyoxymethylene (POM) copolymer based compound reinforced with 30% glass beads. Is a medium viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses high dimensional stability, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , wear-, oxidation- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 13 S/30 is suitable for applications in hot water up to 80-90°C. Can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 13 S/30 complies with UL94 HB flame rating. LATAN 2 by LATI is an unfilled polyoxymethylene (POM) copolymer. Is a high viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Possesses very good tribological properties, high mechanical properties, thermal stability, stiffness, toughness and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , oxidation -, wear- and hydrolysis-resistance. Is suitable for processing by injection molding. Parts made from 2 is suitable for applications in hot water up to 80-90°C. LATAN 2 can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors. LATAN 3E71 by LATI is a polyoxymethylene (POM) copolymer. Is a high viscosity resin grade where comonomer units are causally added in repetitive blocks of trioxan. Provides good elongation, thermal stability, higher oxidation-and impact-resistancePossesses high mechanical properties, stiffness, toughness, thermal stability and self-lubricant properties. Exhibits low moisture absorption, good inertness, good chemical- , oxidation -, wear- and hydrolysis-resistance. LATAN 3E71 is suitable for processing by injection molding. Parts made from 3E71 is suitable for applications in hot water up to 80-90°C. Can be used in gears, cams, bushings and in various parts like electromechanical, hydraulic, automotive and other sectors.
LATAN
Plastics and elastomers supplied by LATI