Return to supplier page
Mediprene® 500700M by HEXPOL COMPOUNDING is a biocompatible thermoplastic elastomer (TPE) containing SEBS rubber, paraf?nic oil and polypropylene. It is free from polyvinyl chloride (PVC), silicon and latex. Exhibits flexibility, elasticity, colorability, soft-touch, short cycle times, resistance to weather, chemicals and fluids used in healthcare environment. It adheres to polypropylene (PP) or polyethylene (PE) without modifying overmolding and coextrusion processes and it is suitable for processing by extrusion and injection molding. Recommended applications include face masks, incontinence care products, connectors, IV systems, intubation equipment, seals, resealable membranes, drip chambers, wound care products, tubing, medical packaging and soft touch grips on medical devices. Mediprene® 500700M complies with biocompatibility according to USP Class VI, FDA 21CFR, 2002/72/EC, ISO 9001, ISO 14001 and ISO 13485 regulations. Mediprene® 520450M by Hexpol is a standard, recyclable and biocompatible thermoplastic elastomer (TPE) grade. Is a polyvinylchloride- (PVC), silicone- and latex free grade. Exhibits flexibility, elasticity, colorability, no toxic fumes, short cycle times, good compression set and resistance to chemical and weather. Provides adhesion to polypropylene (PP) and Polyethylene (PE). Shows sterilization with steam (autoclave), ethylene oxide (EtO) and gamma irradiation. Designed for injection molding and extrusion processing methods. Mediprene® 520450M is recommended for face masks & airway management, IV systems, intubation equipment, drip chambers, tubing, patient comfort, incontinence and wound care products. Suitable for connectors, seals, resealing membranes & stoppers, medical packaging and soft-touch touch grips on medical devices. Complies with FDA 21CFR, Commission Regulation (EU) No 10/2011, USP Class VI, USP <87>, ISO 10993-5, ISO 9001, ISO 14001 and ISO 13485:2003. Mediprene® 520400M by Hexpol is a standard, recyclable and biocompatible thermoplastic elastomer (TPE) grade. Is a polyvinylchloride- (PVC), silicone- and latex free grade. Exhibits flexibility, elasticity, colorability, no toxic fumes, short cycle times, good compression set and resistance to chemical and weather. Provides adhesion to polypropylene (PP) and Polyethylene (PE). Shows sterilization with steam (autoclave), ethylene oxide (EtO) and gamma irradiation. Designed for injection molding and extrusion processing methods. Mediprene® 520400M is recommended for face masks & airway management, IV systems, intubation equipment, drip chambers, tubing, patient comfort, incontinence and wound care products. Suitable for connectors, seals, resealing membranes & stoppers, medical packaging and soft-touch touch grips on medical devices. Complies with FDA 21CFR, Commission Regulation (EU) No 10/2011, USP Class VI, USP <87>, ISO 10993-5, ISO 9001, ISO 14001 and ISO 13485:2003. Mediprene® OF 400M by Hexpol is an anti-kinking thermoplastic elastomer (TPE) grade. It is free from oil, polyvinyl chloride (PVC), silicon and latex. Exhibits soft-touch, good transparency, flexibility over broad temperature range, sealing and adhesion properties. Designed for extrusion and injection molding processes. Recommended for thinner walls such as patches or connectors, tubings, hot-melt adhesives and medical applications. Mediprene® OF 400M complies with USP Class VI, ISO 10993-5 and ISO 13485 regulations. Mediprene® 500400M by Hexpol is a biocompatible thermoplastic elastomer (TPE) containing SEBS rubber, paraf?nic oil and polypropylene. It is free from polyvinyl chloride (PVC), silicon and latex. Exhibits flexibility, elasticity, colorability, soft-touch, short cycle times, resistance to weather, chemicals and fluids used in healthcare environment. It adheres to polypropylene (PP) or polyethylene (PE) without modifying overmolding and coextrusion processes and it is suitable for processing by extrusion and injection molding. Recommended applications include face masks, incontinence care products, connectors, IV systems, intubation equipment, seals, resealable membranes, drip chambers, wound care products, tubing, medical packaging and soft touch grips on medical devices. Mediprene® 500400M complies with biocompatibility according to USP Class VI, FDA 21CFR, 2002/72/EC, ISO 9001, ISO 14001 and ISO 13485 regulations. Mediprene® 500634M by Hexpol is a highly biocompatibile thermoplastic elastomer (TPE) grade with excellent processing characteristics. Provides adhesion to polypropylene (PP) and Polyethylene (PE). Designed for injection molding and extrusion applications. Mediprene® 500634M is recommended for plunger seals in single-use syringes. Complies with FDA 21CFR, Commission Regulation (EU) No 10/2011, ISO 10993-5, USP class VI and USP Mineral Oil NSF H1, reg 125038. Mediprene® 500402M by Hexpol is a soft thermoplastic elastomer (TPE), free from polyvinyl chloride (PVC), silicon and latex. Exhibits good transparency, flexibility over broad temperature range, excellent weatherability, sealing, excellent adhesion to polypropylene (PP), UV- and ozone resistance. Designed for extrusion and injection molding processes. Recommended for face masks, tubings, dental and medical applications. Mediprene® 500402M complies with USP Class VI, ISO 10993 and ISO 13485 regulations. Mediprene® OF 803M by Hexpol is an anti-kinking thermoplastic elastomer (TPE) grade. It is free from oil, polyvinyl chloride (PVC), silicon and latex. Exhibits soft-touch, good transparency, flexibility over broad temperature range, sealing- and adhesion properties. Designed for extrusion and injection molding processes. Recommended for thinner walls such as patches or connectors, tubings, hot-melt adhesives and medical applications. Mediprene® OF 803M complies with USP Class VI, ISO 10993-5 and ISO 13485 regulations. Mediprene® 500750M by Hexpol is a biocompatible thermoplastic elastomer (TPE) containing SEBS rubber, paraf?nic oil and polypropylene. It is free from polyvinyl chloride (PVC), silicon and latex. Exhibits flexibility, elasticity, colorability, soft-touch, short cycle times, resistance to weather, chemicals and fluids used in healthcare environment. It adheres to polypropylene (PP) or polyethylene (PE) without modifying overmolding and coextrusion processes and it is suitable for processing by extrusion and injection molding. Recommended applications include face masks, incontinence care products, connectors, IV systems, intubation equipment, seals, resealable membranes, drip chambers, wound care products, tubing, medical packaging and soft touch grips on medical devices. Mediprene® 500750M complies with biocompatibility according to USP Class VI, FDA 21CFR, 2002/72/EC, ISO 9001, ISO 14001 and ISO 13485 regulations. Mediprene® 500300M by Hexpol is a biocompatible thermoplastic elastomer (TPE) containing SEBS rubber, paraf?nic oil and polypropylene. It is free from polyvinyl chloride (PVC), silicon and latex. Exhibits flexibility, elasticity, colorability, soft-touch, short cycle times, resistance to weather, chemicals and fluids used in healthcare environment. It adheres to polypropylene (PP) or polyethylene (PE) without modifying overmolding and coextrusion processes and it is suitable for processing by extrusion and injection molding. Recommended applications include face masks, incontinence care products, connectors, IV systems, intubation equipment, seals, resealable membranes, drip chambers, wound care products, tubing, medical packaging and soft touch grips on medical devices. Mediprene® 500300M complies with biocompatibility according to USP Class VI, FDA 21CFR, 2002/72/EC, ISO 9001, ISO 14001 and ISO 13485 regulations.
Mediprene®
Plastics and elastomers supplied by HEXPOL COMPOUNDING