Return to supplier page
Xytron™ U3020E (R-X08286A) by Envalior is a flame retardant, polyphenylene sulfide.<br>
<ul style="padding-left: 40px;"><li>It exhibits high viscosity & chemical resistance and offers improved impact properties.</li>
<li>Xytron™ U3020E (R-X08286A) can be processed by injection molding & extrusion.</li></ul> Xytron™ M5710T (P1043A) by Envalior is polyphenylene sulfide (PPS) grade reinforced with 57% glass fiber and mineral. Offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness. It is suitable for processing by injection molding. Xytron™ M5710T (P1043A) is recommended for automotive industry and industrial equipment. Complies with CONEG, REACH, SVHC and RoHS regulations. Xytron™ G4024T by Envalior is a low-flash polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It exhibits excellent mold release, extremely good chemical resistance and flame retardance. It is processed by injection molding. Xytron™ G4024T is used in water pump parts, thermostat push rod, rod guides, filter box of coffee machines and engine block heaters for electric generators. It complies with REACH, CONEG and RoHS regulations. Xytron™ M6510A by Envalior is polyphenylene sulfide (PPS) grade reinforced with 65% glass fiber and mineral. It offers extremely good chemical resistance, excellent dimensional stability, intrinsic flame retardancy and high stiffness. It is processed by injection molding. Xytron™ M6510A is recommended for automotive industry and industrial equipment. Also, used in alternator bridges, crankshaft covers, water pump part, coil insulation and rectifier. It complies with CONEG, REACH, SVHC and RoHS regulations. Xytron™ TC6022I by Envalior is a thermally conductive polyphenylene sulfide (PPS) resin reinforced with 60% glass and mineral. Xytron™ TC6022I is suitable for processing by injection molding. Xytron™ G4010T by Envalior is flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a high-performance plastic compound. It offers extremely good chemical resistance, improved flow, dimensional stability, high stiffness, high rigidity and mechanical strength. It offers lower molding temperatures, high-temperature resistance & hydrolysis resistance. It allows for easy processing. Xytron™ G4010T is used in automotive e-motor bobbins, brush holders (electro motors), charge air cooler caps, coil insulation, end-laminates (electro motors) and engine block heater for electric generators. It is also applicable in the filter box, GI cable pipe, power safety locking component, rectifier, rod guides, thermostat push rod and water pump part. Xytron™ G3010E (P1064C) by Envalior is an impact modified polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. Offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness. It is suitable for processing by injection molding. Xytron™ G3010E (P1064C) is recommended for the automotive and building & construction industry. Complies with CONEG, REACH, SVHC and RoHS regulations. Xytron™ G3080E by Envalior is a high-performance, polyphenylene sulfide (PPS) reinforced with 30% glass fiber. It offers improved impact, extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness. This grade exhibits degradation & stability and chemical stability. Xytron™ G3080E is processed by injection molding. It is used in ADAS radar housing and robotic motors. Xytron™ G4010W (R-X08297A) by Envalior is a 40% glass fiber reinforced, wear & friction modified and flame retardant polyphenylene sulfide (PPS) grade. It exhibits excellent chemical resistance. Xytron™ G4010W (R-X08297A) can be processed using injection molding. The recommended dryer is dehumidified dryer or vacuum dryer with N<sub>2</sub> purge. Xytron™ G4020DW-FC by Envalior is a food contact quality, flame-retardant polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It is suitable for processing by injection molding. It is a high-performance plastic compound and drinking water grade. It offers extremely good chemical resistance, dimensional stability, high stiffness and strength. It provides fatigue and creep resistance, best weldline strength before and after hydrolytic and heat aging. Xytron™ G4020DW-FC is used in hydrogen fuel cells and pipe fittings applications.
314 products 174 products 131 products 95 products
Xytron™
Plastics and elastomers supplied by Envalior
Xytron™ product family by Envalior contains high-performance plastic compounds based on linear polyphenylene sulfide. These products are well suited for a broad range of automotive, electrical and electronics, and specialized industrial applications.
Key benefits of Xytron™ brand include:
- Intrinsically flame retardant
- Dimensional stability
- High chemical resistance
- High stiffness up to a glass transition temperature of 90°C
- Continuous use temperature (CUT) between 240-260°C
15 Products match your search
Xytron™ U3020E (R-X08286A)
by Envalior
- Support available
- Original documents
Xytron™ M5710T (P1043A)
by Envalior
- Sustainable option
- Support available
- Original documents
Xytron™ G4024T
by Envalior
- Sustainable option
- Support available
- Original documents
Xytron™ M6510A
by Envalior
- Sustainable option
- Support available
- Original documents
Xytron™ TC6022I
by Envalior
- Support available
- Original documents
Xytron™ G4010T
by Envalior
- Support available
- Original documents
Xytron™ G3010E (P1064C)
by Envalior
- Sustainable option
- Support available
- Original documents
Xytron™ G3080E
by Envalior
- Support available
- Original documents
Xytron™ G4010W (R-X08297A)
by Envalior
- Support available
- Original documents
Xytron™ G4020DW-FC
by Envalior
- Support available
- Original documents
Durethan®
by Envalior
Akulon®
by Envalior
Pocan®
by Envalior