Return to supplier page
Ashlene® 1021 by Ashley Polymers is a high flow polycarbonate economical grade. Ashlene® 1021 is black in appearance. Used for thin walled parts. Ashlene® 832E is a natural colored, lubricated polyamide 6 (Nylon 6) grade with medium viscosity. Is suitable for processing by injection molding. Most suitable for non critical applications. Used in auto applications and in hardware, plumbing, appliance & industrial components. Ashlene® P265 is a polyphenylene ether [PPE] grade reinforced with 30% glass and modified with flame and UV resistance. Exhibits outstanding strength with reduced mold shrinkage. Ashlene® 727B is an amorphous polyamide (Nylon) copolymer grade with medium viscosity (45-50 R.V.) and puncture resistance. Is suitable for processing by extrusion. Applications include wire jacketing. Ashlene® 829LSNW is a nucleated, heat stabilized, lubricated polyamide 6 (Nylon 6) grade. Is suitable for processing by injection molding. Used in critical auto applications and in hardware, plumbing, appliance & industrial components. Ashlene® P138 40% Mineral is polybutylene terephthalate (PBT) polyester grade reinforced with 40% mineral. Exhibits fatigue resistance as well as high chemical resistance and dimensional stability & excellent heat stability during molding, high flow and low mold surface deposits. Also shows outstanding rigidity with good resistance to warpage and sinking in large areas. Is suitable for processing by injection molding. Used for applications such as headlamp housings or wherever surface gloss is desirable. Ashlene® P293WO is a polyphenylene ether [PPE] grade. Is suitable for processing by extrusion. Ashlene® 105 is unreinforced, low viscosity polybutylene terephthalate (PBT) polyester economy grade. Exhibits heat resistance, dimensional stability, rigidity, and strength as well as chemical resistance. Is suitable for processing by injection molding. Used for high flow applications. Ashlene® 847 is a high impact polyamide 6 (Nylon 6) grade. Is suitable for processing by extrusion. Used in critical auto applications and hardware, plumbing, appliance & industrial components. Ashlene® B925L-25G is a polyamide 12 (Nylon 12) grade reinforced with 25% glass. Exhibits rigidity and dimensional stability. Is suitable for processing by injection molding. Suitable for very low warpage applications such as automotive, construction, appliance and computer components. Potential applications include hardware, plumbing & industrial components.
Ashlene®
Plastics and elastomers supplied by Ashley Polymers