ATLAC® 5200 FC by AOC is a non-reinforced epoxy bisphenol-A vinyl ester, dissolved in styrene. Exhibits tack-free cure and high elongation. It can be cured with 1 ml Butanox LPT-IN (AKZO-Nobel) and 0.5 ml Co-octoate solution (1% Co in styrene) added to 100 g resin. Provides good acid-, alkali-, bleach-, chemical- and thermal resistance. Can be processed by pultrusion, filament winding, centrifugal casting, hand lay-up and spray-up. Suitable for use in corrosive environments, chemical processing industry and applications exposed to intermittent temperatures. ATLAC® 5200 FC is formulated for industrial, food processing and potable water applications. Conforms to type 1310 as per DIN 16946/2, classified group 5 according to DIN 18820/1 & group 7A according to EN13121/2. Complies with food contact regulations.
ATLAC® 590 by AOC is a non-reinforced, epoxy novolac-based vinyl ester resin for demanding corrosive environments, dissolved in styrene. It can be cured with 0.3% NL51P and 1% Butanox M-50. It offers high retention of strength at elevated temperatures. This grade provides excellent thermal & chemical resistance against solvents, acids and oxidizing media like chlorine. It is processed by filament winding, centrifugal casting, hand lay-up and spray-up applications. Designed for power, mortars, offshore, building & construction, infrastructure and industrial applications. ATLAC® 590 conforms to KIWA approval (BRL-K 541/01), type 1310 as per DIN 16946/2, classified group 5 according to DIN 18820/1 and group 7A according to EN13121/2.
Neomould® 6800-G-1 by AOC is based on vinyl ester resin. Exhibits high heat resistance, vacuum infusion, extra low viscosity, increased production output and low styrene emission. It offers excellent surface quality through zero-shrinkage. It enables to make great tools at high length with infusion version and tool surface is easy to repair in case of eventualities.<br>
<ul style="padding-left: 40px;"><li> Provides longer tool life and excellent reproducibility of surface quality during tool use.</li>
<li> The tool has ability to withstand a higher exothermic peak and higher post-cure temperatures.</li>
<li> It is a cost-effective solution for manufacturing composite.</li>
<li>Neomould® 6800-G-1 have ability to create unique shapes, composite tools which enable the manufacturing of large components like wind turbine blades, boats and façade panels for buildings.</li></ul>
