REACH

Xytron™ M5710T (P1043A) by Envalior is polyphenylene sulfide (PPS) grade reinforced with 57% glass fiber and mineral. Offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness. It is suitable for processing by injection molding. Xytron™ M5710T (P1043A) is recommended for automotive industry and industrial equipment. Complies with CONEG, REACH, SVHC and RoHS regulations.

Xytron™ G4024T by Envalior is a low-flash polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber. It exhibits excellent mold release, extremely good chemical resistance and flame retardance. It is processed by injection molding. Xytron™ G4024T is used in water pump parts, thermostat push rod, rod guides, filter box of coffee machines and engine block heaters for electric generators. It complies with REACH, CONEG and RoHS regulations.

Xytron™ M6510A by Envalior is polyphenylene sulfide (PPS) grade reinforced with 65% glass fiber and mineral. It offers extremely good chemical resistance, excellent dimensional stability, intrinsic flame retardancy and high stiffness. It is processed by injection molding. Xytron™ M6510A is recommended for automotive industry and industrial equipment. Also, used in alternator bridges, crankshaft covers, water pump part, coil insulation and rectifier. It complies with CONEG, REACH, SVHC and RoHS regulations.

Xytron™ G3010E (P1064C) by Envalior is an impact modified polyphenylene sulfide (PPS) grade reinforced with 30% glass fiber. Offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness. It is suitable for processing by injection molding. Xytron™ G3010E (P1064C) is recommended for the automotive and building & construction industry. Complies with CONEG, REACH, SVHC and RoHS regulations.

Xytron™ G4010E (P952N) by Envalior is an impact-modified polyphenylene sulfide (PPS) grade reinforced with 40% glass fiber.

• Offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness.
• It is suitable for processing by injection molding.
• Xytron™ G4010E (P952N) is recommended for the automotive industry.
• It complies with CONEG, REACH, SVHC and RoHS regulations.

OnFlex™ NHFR 7001 Series by Avient (Formerly PolyOne) are non-halogen flame-retardant TPE grade.

• They are designed to meet UL 94 V-0 fire safety standards.
• They are suitable for automotive, electronics, consumer goods and construction applications.
• OnFlex™ NHFR 7001 Series offer high flexibility for long-term durability.
• They provide minimal blooming for appearance and performance stability.
• They help maintain properties through low moisture absorption.
• They comply with REACH and RoHS requirements.
• They help reduce smoke density during combustion.
• They support incorporation of recycled materials.
• They balance mechanical, flame, and physical properties.
• They offer shorter processing times compared to nylon.

Eastman Tritan™ Copolyester MP100 by Eastman is a BPA- and phthalate-free amorphous copolyester grade. It is clear, sustainable, provides heat and chemical resistance. It is suitable for most forms of sterilization except for autoclave/steam sterilization. It can be processed via extrusion, thermoforming, heat & radio frequency sealing. Films manufactured from this co-polyester can be thermoformed with a wide processing window. Eastman Tritan™ Copolyester MP100 is used in device packaging and medical applications such as extruded medical films and sheeting and rigid and sterile packaging.

Arnitel® HT8027 by Envalior is a heat resistant, high performance, thermoplastic copolyester (COPE) grade. It is a lighter, smarter, greener alternative to conventional rubbers thus, reducing environmental impact. It is processed by injection molding, blow molding and extrusion applications. This grade is used in clean air inlet ducts and hot charged air ducts. It allows weight and cost reduction of upto 50%. It is suitable for different connector systems (e.g. HENN). It offers chemical resistance and high heat aging at 180°C for 3000 hours. It provides less potential of leakage, less pressure loss, fast- and easy processing. It allows for light weight solutions (50% lighter than rubber & metal) and reliable solutions due to its perfect combination of high (aging) temperature resistance and good flexibility. Arnitel® HT8027 complies with CONEG, RoHS and REACH regulations.

SABIC® PP 570P by SABIC is polypropylene (PP) homopolymer resin. It possesses good mechanical properties, high gloss and good toughness.

• It exhibits consistent processability, recyclability and good flexibility.
• It is suitable for processing by injection molding.
• It is designed for rigid general purpose applications such as houseware articles.
• SABIC® PP 570P is REACH registered.

EcoPaXX® Q-HG6 by Envalior is a heat-stabilized, 30% glass-fiber-reinforced, long aliphatic polyamide (PA410) based on castor oil. It is processed by injection molding. It is particularly suitable for use in high-tech applications due to its low moisture absorption and excellent mechanical properties. It shows excellent chemical & hydrolysis resistance for use in thermal management applications as well as other structural parts. It has high melting point of about 250°C and a high rate of crystallization (faster and more efficient production). It allows for reliable solutions due to high-temperature resistance, good electrical insulation properties, high resistance to coolants even at elevated temperatures and due to its good thermo-mechanical properties (it withstands high internal pressures at temperatures of up to 135°C outperforming PA66). And, allows for light weight (30% weight reduction versus PA66) and sustainable solutions due to its biobased character. EcoPaXX® Q-HG6 offers excellent low-temperature resistance and excellent combination of flexibility and stiffness as required in a mountaineering shoe. It enables solutions which are 100% carbon neutral from cradle to cradle. It allows for lightweight (40-50% lighter) and more cost effective solutions than metal at the cold side. It is used in automotive connectors, charge air cooler caps, coolant hose T-connectors, coolant expansion tank, fuel line connectors, fuel system, positition sensor, snowboard bindings, speed & temperature sensor, wheel speed sensors and window profiles.