BPA-free

Eastman TRĒVA™ Engineering Bioplastic GC6021 Clear by Eastman is a BPA-free, cellulose-based engineering bioplastic grade with 42% bio-based content. It offers both high performance and reduced environmental impact. TREVA™ Provides chemical resistance, dimensional stability, excellent flow and low birefringence. Eastman TRĒVA™ Engineering Bioplastic GC6021 Clear is used in complex & intricate parts, wearable devices & headphones, electronics and housing applications. It complies with United States Department of Agriculture (USDA) regulation.

Eastman TRĒVA™ Engineering Bioplastic GC6011 Clear by Eastman is a BPA-free, cellulose-based engineering bioplastic grade. It offers high performance, good clarity and reduced environmental impact. It shows chemical resistance, dimensional stability, excellent flow and low birefringence. Eastman TRĒVA™ Engineering Bioplastic GC6011 Clear is used in complex & intricate parts, wearable devices & headphones, electronics & housings and electronic display applications (lenses & covers). It also complies with United States Department of Agriculture (USDA) regulation.

Medalist® MD-91970 by Teknor Apex is a thermoplastic elastomer (TPE) grade. It provides long-lasting performance with superior flexibility and durability, ensuring smooth fluid flow. It is made with FDA-compliant, biocompatible (ISO 10993-5) ingredients, free of DEHP, phthalates, BPA, latex, and animal-derived materials. It is a recyclable grade that can be processed using standard thermoplastic processing equipment.

• It delivers up to 50% better performance than other leading TPEs.
• It provides optical clarity and helps to gain clear visibility to the inside of the tube.
• It exhibits excellent resistance to spallation and minimizes the risk of particulate contamination.
• It is resistant to chemicals such as isopropyl alcohol, acids, bases, and disinfectants like chlorine and bleach.
• It offers fast cycle times, lower unit cost on a volume basis, weldability, and low permeability and tackiness.
• It can be sterilized with various methods including ethylene oxide (EO), gamma, E-Beam, x-ray, and autoclaving.
• It is medical grade TPE used in demanding biopharma tubing applications.
• Medalist® MD-91970 complies with REACH SVHC, Proposition 65, CONEG, and RoHS.

Medalist® MD-91760 by Teknor Apex is a thermoplastic elastomer (TPE) grade. It offers an unbeatable combination of spallation resistance and clarity. It delivers up to 50% better performance than other leading TPEs for demanding biopharma tubing applications.

• It provides long-lasting performance with superior flexibility and durability, ensuring smooth fluid flow.
• It is made with FDA-compliant, biocompatible (ISO 10993-5) ingredients, free of DEHP, phthalates, BPA, latex, and animal-derived materials.
• It offers fast cycle times, generally lower unit cost on a volume basis, weldability, and low permeability and tackiness.
• It is resistant to chemicals such as isopropyl alcohol, acids, bases, and disinfectants like chlorine and bleach.
• It can be sterilized with various methods including ethylene oxide (EO), gamma, E-Beam, x-ray, and autoclaving.
• It is a recyclable grade that can be processed using standard thermoplastic processing equipment.
• Medalist® MD-91760 complies with REACH SVHC, Proposition 65, CONEG, and RoHS.

ELASTOSIL® LR 3078/50 A/B by Wacker is a self-adhesive, easily-pigmentable two-component liquid silicone rubber with extremely short curing times. Its vulcanizates show excellent mechanical and electrical properties.

• It is heavy metal-, GMO-, BSE-, TSE-, PAH-, DMF-, APEO-, phthalates-, azo compounds-, PCDD/PCDF-, asbestos-, melamine-, bisphenols-, radioactive substances, POP-, conflict mineral-, ODS-, SCCP- & PFAS-free grade.
• It is primeless grade that adhere to polycarbonate (PC) and various high-performance plastics substrates such as polyarylethersulfones (PESU, PSU, PPSU).
• It creates strong adherence to the thermoplastic during curing.
• It is characterized by a very low tendency of mold deposition and specially developed for 2K injection-molding.
• It is biocompatible and can be steam-sterilized at a temperature of 134 °C without impairing the mechanical properties of the elastomer or its good adhesion to the plastic.
• It is designed for use in general automotive parts and particularly suitable for the economical production of large series of over molded parts (thermoplastic/elastomer), even in a comolding process (shuttle mold) under standard conditions, without any special treatment of the mold surface.
• It is generally used for face-, ventilation- & anesthesia masks, technical applications and medical components.
• The type of mask made with this grade has a soft cushion that adapts perfectly to the contours of the face, ensuring a tight fit.
• It is also suitable for drug delivery systems and devices for minimally invasive procedures.

ELASTOSIL® LR 3078/70 A/B by Wacker is a self-adhesive, easily-pigmentable two-component liquid silicone rubber with extremely short curing times. It's vulcanizates shows excellent mechanical and electrical properties.

• It is heavy metal-, GMO-, BSE-, TSE-, PAH-, DMF-, APEO-, phthalates-, azo compounds-, PCDD/PCDF-, asbestos-, melamine-, bisphenols-, radioactive substances, POP-, conflict mineral-, ODS-, SCCP- & PFAS-free grade.
• It is primeless grade that adhere to polycarbonate (PC) and various high-performance plastics substrates such as polyarylethersulfones (PESU, PSU, PPSU).
• It creates strong adherence to the thermoplastic during curing.
• It is characterized by a very low tendency of mold deposition and specially developed for 2K injection-molding.
• It is designed for use in general automotive parts and particularly suitable for the economical production of large series of over molded parts (thermoplastic/elastomer), even in a comolding process (shuttle mold) under standard conditions, without any special treatment of the mold surface.
• It is biocompatible and can be steam-sterilized at a temperature of 134 °C without impairing the mechanical properties of the elastomer or its good adhesion to the plastic.
• It is generally used for face-, ventilation- & anesthesia masks, technical applications and medical components.
• The type of mask made with this grade has a soft cushion that adapts perfectly to the contours of the face, ensuring a tight fit.
• It is also suitable for drug delivery systems and devices for minimally invasive procedures.

ELASTOSIL® LR 3078/60 A/B by Wacker is a self-adhesive, easily-pigmentable two-component liquid silicone rubber with extremely short curing times. Its vulcanizates show excellent mechanical and electrical properties.

• It is heavy metal-, GMO-, BSE-, TSE-, PAH-, DMF-, APEO-, phthalates-, azo compounds-, PCDD/PCDF-, asbestos-, melamine-, bisphenols-, radioactive substances, POP-, conflict mineral-, ODS-, SCCP- & PFAS-free grade.
• It is primeless grade that adhere to polycarbonate (PC) and various high-performance plastics substrates such as polyarylethersulfones (PESU, PSU, PPSU).
• It is biocompatible and can be steam-sterilized at a temperature of 134 °C without impairing the mechanical properties of the elastomer or its good adhesion to the plastic.
• It creates strong adherence to the thermoplastic during curing.
• It is characterized by a very low tendency of mold deposition and specially developed for 2K injection-molding.
• It is recommended for general automotive parts and particularly suitable for the economical production of large series of over molded parts (thermoplastic/elastomer), even in a comolding process (shuttle mold) under standard conditions, without any special treatment of the mold surface.
• It is generally used for face-, ventilation- & anesthesia masks, technical applications and medical components.
• The type of mask made with this grade has a soft cushion that adapts perfectly to the contours of the face, ensuring a tight fit.
• It is also suitable for drug delivery systems and devices for minimally invasive procedures.

WENEW RPR 3A1 NL Recycled Polyethylene by Braskem is a sustainable, recycled, bisphenol A-free high-density polyethylene (HDPE) grade. It contains PCR resin. It is suitable for processing by blow molding and extrusion.

• It exhibits chemical resistance and good environmental stress crack resistance (ESCR).
• It offers good processability, rigidity and stiffness.
• It is recommended for blown containers, bottles, containers, corrugated pipe, cosmetic packaging, and industrial containers.
• It is used in building & construction materials such as pipes & plumbing, consumer goods like housewares, printing-, food & beverage-, industrial & transport-, non-food consumer-, and cosmetic packaging.
• WENEW RPR 3A1 NL Recycled Polyethylene is food contact acceptable and has a low carbon footprint (PCF).

SABIC® PP 576P by SABIC is a PFAS- and BPA-free polypropylene (PP) homopolymer resin based on recycled ocean bound plastic (OBP). It possesses good flow properties and a narrow molecular weight distribution. It helps reduce marine litter and accelerate circularity.

• It offers ease of processing and provides dimensionally stable parts with low warpage, high gloss, high stiffness and moderate impact strength at room temperature.
• SABIC® PP 576P is suitable for vacuum containers, caps, closures and thin wall packaging both in food and non-food segments.
• It is UL registered and ISCC PLUS certified.

Duradex™ PPSU MB by Solvay is a high purity, amorphous, naturally amber-transparent polyphenyl sulfone (PPSU) food-contact grade. It is free of artificial pigments, phthalates and bisphenols such as BPA. It offers an inherently non-stick surface, high scratch resistance, stain resistance, and does not absorb odors.

• It exhibits exceptional hydrolytic stability and shatter-proof toughness with high heat resistance.
• Duradex™ PPSU MB is specially designed for baby feeding bottles.
• It provides lightweight, ergonomically shaped and wide-opening bottles for more than 1,000 steam or hot water sterilization as well as dishwasher cycles without the risk of any damage.
• It is linked to 54% allocated circular, non-fossil feedstock, which is third-party mass-balance (MB) verified under International Sustainability & Carbon Certification PLUS (ISCC PLUS).