Technical datasheet
Conductive PA66 DD2
Supplied byYuyao Zhongfa Engineering Plastics- Last Updated on Oct 10, 2025
Conductive PA66 DD2 by Yuyao Zhongfa Engineering Plastics is a conductive PA 66 grade. It is suitable for injection molding application. It exhibits electrical conductivity, high mechanical properties, good electrical properties, heat resistance and good processability. Conductive PA66 DD2 is used in electronic and electrical products.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Conductive PA66 DD2 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Electrical Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Impact properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Conductive PA66 DD2 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |