T-BLEND® 7000N-PB by TSRC Corporation is a recyclable styrenic block copolymer (SBS) grade. Offers good weather resistance, softness, rebound resilience, good compression and good bending properties. Also offers good shock-proof and anti-slippery effects. It has a strong ability to bond with commonly used plastics such as PP, ABS, PC and nylon. It is insoluble in water. Is suitable for processing by injection molding. It is specially designed for PP and elastic PP
over molding. T-BLEND® 7000N-PB is recommended for shoe material applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
T-BLEND® 7000N-PB properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
T-BLEND® 7000N-PB Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Barrel Feed Temperature | Visible After Login | Visible After Login | |
| Barrel Front Temperature | Visible After Login | Visible After Login | |
| Barrel Nozzle Temperature | Visible After Login | Visible After Login | |
| Barrel Rear Temperature | Visible After Login | Visible After Login | |
| Compression Ratio | Visible After Login | Visible After Login | |
| Cycle | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Injection Speed | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Screw (L/D Ratio) | Visible After Login | Visible After Login | |