Plaslube® AC-80/TF/10 NAT is a polyoxymethylene (POM) copolymer grade. Exhibits excellent wear resistance, low coefficient of friction, low noise, reduced slip-stick, elimination of external lubes and enhanced abrasive wear properties. Shows low thermal expansion, good fatigue endurance, high creep resistance & load bearing capacity, and excellent impact strength & dimensional stability. Can be processed using injection molding. Possible automotive, electrical & consumer durable applications include automotive door-lock mechanism & seat adjustment assemblies, gears, bushings, drive components, seals, fuel line clips, pump components, structural housings, HVAC components, bezels, support brackets, pulleys & connectors, coil insulation, cooling plates, LED lighting components, and bearings for consumer durable & electronic products. It complies with the RoHS regulation.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Plaslube® AC-80/TF/10 NAT properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Comparative Tracking Index (CTI), UL 746 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| High Amp Arc Ignition (HAI), UL 746 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hot-Wire Ignition (HWI), UL 746 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hot-Wire Ignition (HWI), UL 746 | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating, UL 94 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flammability Classification | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flammability Classification | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| UL (RTI), Electrical | 0.0 Visible After Login | Visible After Login | Visible After Login |
| UL (RTI), Mechanical with Impact | 0.0 Visible After Login | Visible After Login | Visible After Login |
| UL (RTI), Mechanical without Impact | 0.0 Visible After Login | Visible After Login | Visible After Login |
Plaslube® AC-80/TF/10 NAT Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Moisture Content (Max) | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Molding Shrinkage - Flow | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |