FE-251-U by Shin-Etsu is a fluorosilicone rubber by Shin-Etsu, containing 0.8 of C-8A curing agent. It is highly resistant to high & low temperatures, solvents, oil, flex fatigue and silicone fluids. Shows excellent workability. FE-251-U is suitable for processing by compression moldng. Used in flame-resistant diaphragms, check valves, gaskets and O-rings.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
FE-251-U properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 200% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Rebound Resilience | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
FE-251-U Processing Guidelines
Compression Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Mold Temperature | Visible After Login | Visible After Login | |
| Mold Time (10-25 mm thickness) | Visible After Login | Visible After Login | |
| Mold Time (25-50 mm thickness) | Visible After Login | Visible After Login | |
| Mold Time (5-10 mm thickness) | Visible After Login | Visible After Login | |
| Pressure | Visible After Login | Visible After Login | |