Technical datasheet
ENFLEX® EA5790A
Supplied byRavago Manufacturing Americas- Last Updated on Mar 17, 2025
ENFLEX® EA5790A by Ravago Manufacturing Americas is a soft and recyclable thermoplastic elastomer grade. It offers high heat performance with excellent oil- and fluid resistance. It exhibits resiliency, high strength and elasticity like rubber, good flexibility, processability and colorability by proper masterbatch (ethylene methyl acrylate (EMA) preferred for adhesion).
- It provides low compression set, alcohol-, detergent-, ozone-, solvent- and UV resistance.
- It shows overmolded adhesion to acrylonitrile butadiene styrene (ABS), polycarbonate (PC), polyester and acrylics.
- It is designed for injection molding and extrusion processes.
- ENFLEX® EA5790A is also recommended for automotive under the hood applications such as gaskets, grommets, seals, and plugs.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
ENFLEX® EA5790A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
ENFLEX® EA5790A Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Compression ratio | Visible After Login | Visible After Login | |
| Compression zone Temperature | Visible After Login | Visible After Login | |
| Cooling Water Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 1 Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 5 Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Feed Throat Temperature | Visible After Login | Visible After Login | |
| Feed Zone Temperature | Visible After Login | Visible After Login | |
| Hopper Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Metering Zone Temperature | Visible After Login | Visible After Login | |
| Screen Pack | Visible After Login | Visible After Login | |
| Screw L/D Ratio | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Clamp Tonnage | Visible After Login | Visible After Login | |
| Cooling Times | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Holding Time | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Rate | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |