Technical datasheet
ENFLEX® EA3745A
Supplied byRavago Manufacturing Americas- Last Updated on Jan 6, 2024
ENFLEX® EA3745A by Ravago Manufacturing Americas is a recyclable styrenic block copolymer (SBC). Offers soft & tactile feel, overmolded and co-extruded adhesion to acrylonitrile butadiene styrene (ABS), polycarbonate (PC) and polystyrene high impact (HIPS/PS).
- It exhibits acid-, alcohol-, base-, detergent-, oil-, ozone-, water-, solvent- and UV resistance.
- It provides high elasticity like rubber, ease of processing and good coloring by proper masterbatch (ethylene methyl acrylate (EMA) and polystyrene (PS) preferred).
- ENFLEX® EA3745A is designed for injection molding and extrusion applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
ENFLEX® EA3745A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
ENFLEX® EA3745A Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Compression ratio | Visible After Login | Visible After Login | |
| Compression zone Temperature | Visible After Login | Visible After Login | |
| Cooling Water Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 1 Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 5 Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Feed Throat Temperature | Visible After Login | Visible After Login | |
| Feed Zone Temperature | Visible After Login | Visible After Login | |
| Hopper Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Metering Zone Temperature | Visible After Login | Visible After Login | |
| Screen Pack | Visible After Login | Visible After Login | |
| Screw L/D Ratio | Visible After Login | Visible After Login | |
| Screw speed | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Clamp Tonnage | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Holding Time | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |