Technical datasheet
Wondel® TM6
Supplied byNanjing Julong Engineering Plastics- Last Updated on Jan 28, 2025
Wondel® TM6 by Nanjing Julong Engineering Plastics is a polybutylene terephthalate (PBT) reinforced with 30% mineral. Possesses low moisture absorption, good dimensional stability, excellent mechanical properties such as high stiffness and rigidity. Provides high gloss, good lubricity and shorter cycle time with lower mold temperature. Exhibits low warpage, superior dielectric property, good UV and abrasion resistance. Wondel® TM6 is recommended for electronic coupling, fuse block, bobbin and lamp holder. Complies with RoHS, UL 94 HB flame rating and meets with the requirements of ISO/TS 16949:2002 standard.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
Wondel® TM6 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Surface Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
